Hondata

changed from D10ELD to B6 AN2.. the AF is alot closer to the gauge now..

god.. hope i dont screw anything up lol, i have the ELD disabled now, is it not supposed to be?

right now hondata is on D10 ELD at 0v

yaa, i figured that out lol..i havent really checked the wireing..tho, im not really sure what to look for, a buddy of mine did the wideband install.

not yet..just got the car running again today.. had to hunt down a starter.

anyway, at idle im seeing 12.2 on the PLX, and 14.7 on hondata.

ive tried changeing the volts 0 .2 .3 .4, it doesnt seem to change the number on the PLX.

but ill try a new map, see if that does anything.

another log

2.48 is high? really, what should it be at?

10 to 9's really? wow, my wideband doesnt show that at all. shows 13 to 14's under boost, thats why ive been trying to add more fuel. Im useing PLX wideband.
i am seeing 14.4 to 14.8 in idleing.

well shit lol, ill check the A/F sensor, and fix the injectors. see what happends.

thanks for the help ...

It studders so much it sounds like a subaru now..no idea what it could be, ive tried changing eveything i thought would cause it in the ECU.

And this is the calibration

this is the datalog

ok, ill get a datalog tomorrow, and post the calibration, i was thinking it was my fuel pump, cuz it was working fine before..and now i cant keep it in the 12's under boost no matter what i do. but ya, i do need bigger injectors.

This car is boosted, i had it running well, A/F were looking good, throughout the entire rpm range, even into boost it was 12.0-12.5. I decided to change the ignition to .75 per lb of boost to .70 per lbs of boost, didnt change anything else, fuel was still 190% of N/A fuel levels. After the ...

i had the same kind of problem..i had to change the throttle value into the negative like.. -2.75% to 100%.

I need a base map, for stock internal b16a with a 54trim turbo

Im very new to hondata, just did the OBD1-S300 change yesterday. i have the stock JDM b16a map loaded. My problem is when i let off the throttle, my wideband almost instantly says "lean" then "Air" , i am unsure how to fix it. This is surely a noob question, so im sorry in advance lol.