Hondata

Hondata,

Thank you for your reply. Would VTec @ 2500rpm too low? According to Jackson Racing web site, that's what their setting is. Check this out.

http://www.supercharger.com/Shop/ViewPr ... exID=41633

Spunkster,

Thank you for the link. I've actually read through the help menu ( I bet its the same as your link?). Let say I want to modified my current setting so that VTec kicks in @ 2500rpm when the boost hts 1psi. Can you give me a step by step procedure?

I think the only problem about the help ...

Spunkster,

Thank you for the link. I've actually read through the help menu ( I bet its the same as your link?). Let say I want to modified my current setting so that VTec kicks in @ 2500rpm when the boost hts 1psi. Can you give me a step by step procedure?

I think the only problem about the help ...

Yes. However, there is nohwere to specify the setting. The only selection is measurement unit.

I wonder if there is a write up for newbie of this product?

Spunkster,

Thanks for your support. I assumed that I shoud not touch any mechanical setting when I install the S300. Since you keep refering to service manual, I would just follow the procedure completely tonite.

As for the VTec setting, wehre do I specify the manifold pressure to boost or vaccum?

I actually fixed the high idling issue when I turn on the headlight. I actually adjust the idle valve.

However, I couldn't figure out how to lower the rpm during cold start. When I start my engine during early morning, the rpm goes up to 2500rpm and it knocks. The knocks go away when it drops ...

Spunkster,

My min. idle setting is set to 900rpm. The highest rpm setting is 1602rpm when the coolant is -40F. That's why I wonder if there are other settings or I am missing something. I've gone through the parameter menu. Maybe you can give me more in depth idea behind the functions?

For the ...

In Smanager, go to File, New, all the calibrations are there.

Spunkster,

Is that the mapping that Jackson Racing uses for their big boost kit? I thought they are different? I believe that my tuned calibration is based on that file from the S Manager.

The one from JR's big boost kit has a VTec ...

Martian wrote:Read the help file in smanager

Can you give me a pointer? I know the help menu talks about the high idle issue a bit. However, I do not see anywhere tells me what to set. Did I overlook somewhere?

Guys,

I've tuned my S300 and everything was fine when I drove out from the tuning shop. I found out a few problems the next day.

1) The car idle very high during cold start. It raises to ~2600rpm. It does minor knocking until the rpm drops. THe idle drops to ~1000rpm after complete warm up. When I ...

Does anyone purchased a Hondata from Jackson Racing? Can I get a copy of your calibration file?

My car is tuned but I have some idling issue during cold start. I would like to load the preset mapping and do a comparison. Also, want to try out that VTec kicks in @ 2500rpm with 1psi. I'd be very ...