Hondata

The problem seems to be solved!
Thanks for the input guys!

Anybody an idea?

Swapped the TB today, did some new datalogging, it seems that the hesitation is a bit less but is still occurring.
Any other ideas cause i m all out...

Attached some new logs.

Thanks, will swap out TB's today.

Hey,

I made the changes but no effect at all.
I updated my first post with the changes in the map and new datalogs.

Thanks for the reply, i see what you mean, don t know why the tuner put the cam angles that way but i ll have a look at them.
This still doesn t explain why i have the ign issue though.

- serial number K-Pro: 7831
- KManager version 3.1.2.0
- Euro civic type R with PRA ecu
- AEM CAI, RBC intake, DC headers, Toda catback.

Dear Hondata,
I have the following issue,
When driving at a steady rpm, mostly @ 4000 rpm in a low gear, the car starts to hesitate.
When looking at the datalog ...

Update:
Send the ecu to CPL Racing to check out, the kpro board was broken but the ecu was still good. Had the kpro board replaced with a new one and all problems gone.

Thanks for the input and thanks CPL Racing.

Ok, did some driving again this weekend and still the same problem.
I turn on ignition, ecu does self check cel goes on and back off and after a couple of seconds the cel comes back on and stays on.
If i turn ignition off, plug in the ecu to my laptop, turn ign on and all is fine, i can start the ...

Spunkster wrote:http://www.hondata.com/updates/KManagerV1-3-5-3.exe

Downloaded and installed, gonna hook it up to the car this weekend and see what happens.
Will let you know.

Thanks.

At the time i was using version 1-3-5.
I have updated to 1-3-5-1 but not tried to connect to kpro yet.
Also just saw there is another update, ver. 1-3-4-0, will download that one now.

Edit, unable to download 1-3-4-0 at the moment.

Hey guys,
I have the following:
Kpro serial: 03384
PRB ecu
Car: EU CTR-SC EP3 K20A2
Vista with v 1.3.5.3
The following is happening,
When i connect my laptop to the ecu i get online and can get the ecu info etc, so far so good.
I turn on the ignition, ignition comes on in kmanager, try and load my ...