Hondata

Ok.. ill try that as soon as possible.

Thanks

I took the map sensor off.. The o ring was not installed when my friend assembled the throttle body.

Fixed the o ring but the car idle's in the 7/8 columns now.

Thing i noticed between Smanager and Kmanager (since i know k series better then d series)

I looked at the tables and the #1 column on ...

yes i have.. Original base was made for me from Corey at Slowmotion motor sports to start the car up..

I checked all parameters and they are correct.. My only thinking is a Map sensor problem or a vacuum leak..

It is a new hondata 4 bar map sensor.. TPS is working correctly so im pretty sure the plugs are not reversed.. car idles well, just seems odd to me..

Recently finished up a build of a d16. Its bored to 78mm, stg 3 comp cam, gt30 turbo, peakboost ram horn, 3 inch turbo back exhaust. It has a hondata map sensor Working on getting the car to idle so we can get it on the trailer to take it to be tuned..

What would cause the idle to be in column's 8 ...

Ok.. sorry for the big gap in time.. I had to put some new rings in the motor.. Its running even better now..

I got a decent PT datalog at least i feel it is..

Knock sensor is working so let me know what you think.

I appreciate it a bunch.

Jason

I cannot get it to upload though..

sorry i was out of town.. Ill get to the datalogs tomorrow night i hope. What i did wast a 3rd gear pull and did the a/f tuning using the lambda overlay.. i had to remove a little bit of fuel across the wot map...

i will get them using the new kal you supplied.
Thanks

yeah, I know what spark knock sounds like..

My knock sensor threw a code when i was out so i disabled it. Do you got any ideas on a better sensor to put in there?

How long of a datalog do you want?

Thanks again for the help.

Here is an idle datalog and a 3rd gear datalog..

I did the recommended fuel adjustments in the 3rd gear log.. Any other pointers would be great.

that would be sweet.. Ill try and get a datalog up tonight after work..

Thanks a ton

Map worked great.. Im just getting a pretty rough idle.. Im not sure what to change to help it out. Ill see what i can do to get a datalog up on here for you to see.

thanks a bunch.. ill try it sunday.

am i just not seeing this?? lol

where is the .kal to try? lol

i was told the k20a2 with crower stage 2 cams would work with some added fuel and some a/f tuning.. I only want a tune that is safe to break the motor in with some highway driving. I want to get it tuned the first week of april.

Thanks

Hello people, I would like some input on what tune to run for my setup. Here is what i have.

K24 block
TSX pistons
Blueprint rods
K20z3 head with blueprint port and polish
Flat Face Valves
Brian Crower stage 2 cams
Brian Crower Dual valve springs
DC race header
Buddy Club spec 3 exhaust

Any input ...