Hondata

Question: Did you see a big difference with Skunk cams compared to stock since its turbo? Also did you do extensive work on your head? I'm getting an AV Eng stage 3 block but still working out what I want to do to the head. Some say the stock cams work just a well as AFM cams and I wont see much ...

cardinal811 wrote:Here is the 364hp 330ftlbs of torque map with a MAC valves EBC

I thank you so much, this got rid of the problem all I had to do was modify some settings such as as injector sizes and overall fuel trim.

Been tuning my turbo for about 6 months now and I've ran into a problem I can't figure out. Reving pass 5300 rpms and the engine sputters and loses power. Yet I see nothing wrong on the datalog. If anymore information is needed let me know.

I'm running 750s but my engine is stock. The tune I've been playing with works okay , I has some faults but it might help you out.

My bad I downloaded the wrong one. I think this is the right one

I have been looking at others people post about lack of power when hitting vtec but for some reason I have yet to find my problem. Here is what happens.
I accell with boost climbing to 5 lbs (set to 7lb cut) once I get to 5200 or so right were I set vtec cross. I get this nasty crasping from the ...

Thanks man, ya follow VTEC is checked. See my problem is that when I get into boost. I get this bog or it might even be protection mode at about 5k. I'm not running alot of boost about 7lbs but I can only get like 5 at the moment due to this bog. Its not fuel cutting out but either timing or fuel ...

I've been unable to tune my high speed tables even though they are working. I have secondary on (always) , the check mark is checked . When I click the high speed fuel or ignition, I see the table for a split second then it goes back to low speed. I've tried clicking it in open loop and closed. Any ...

Anyone know what map setting I can use? It looks just like a GM map sensor. It states that is can be used on Hondata systems but Not who makes it.

I was able to get it to run half way decent. It has a slight bog of idle but it will do til I get ready to send it over for a down pipe and tune. Its still stock at the moment just running rich but better then lean. Reguarding the wide band. I plan on getting one in the near future. Running a narrow ...

I'm getting my car together but can't install the turbo yet (need exhaust) anyways just setup the computer (s300,p28) got it to run "okay" with the stock injectors but once I installed the RC 750s it won't run at all. I changed the injector size but since I'm not a tuner I have no idea how to change ...