Hondata

Got the clutch and flywheel replaced and here's the datalog, there's no more knock, but i remember you telling me that the tune still needed some work...

thanks

here's a data log, i car is running a little rough and it's knocking a bit specially when it's in a higher gear with low rpm on slight ramp. i couldn't do the 4th gear run because the clutch was slipping for some reason, but it's only slipping in 4th 5th and 6th gear.


thanks man

hey cranny, sorry man i was really busy, and the car was in the shop for a while... heard you've been looking for me a while back. i just got my car back. and thanks plenty for helping out my buddy.

around a year ago, i came across a 99 Accord Type R front end at a local junk yard, the guy didn't know what it was and since no one wanted it, i bought it for very cheap. the h22a7 that came out of it was installed on my CRX. after installing everything the immobilizer wouldn't allow the car to ...

a buddy of mine just got his car k-pro'ed. so i gave him my map (which is tuned for a jdm dc5 k20a with CAI and 3" exhaust on an ep).

his car is running way too rich, knock isn't the issue, it's just way too much gas which is understandable cause he has a euro CTR with a JDM k20a ep3 swap, stock ...

thanks alot man. i really appreciate it. i'll do my best to stay off the redline hehe.

and the log

most the knocking is gone... the car is totally different tho. i'm sorry about the other map i simply uploaded the wrong one... but i deleted everything else now.

i cannot thank you enuf, the car feels totally different... i'm impressed. on the full throttle shift option, you set the shift limiter to 7k rpm, the engine cuts off @ 7k rpm. so i just disabled the the full throttle shift. and i still can't figure out how to set the numbers in that field.

thanks ...

yes i am a little harsh on my car, but with my experience with hondas they are made to take this beating hehe. i tried driving my Bimmer like that once, ended up with a broken pretty much everything.

thanks i'll get that datalog and upload it in around an hour or 2 max.
thanks man

here's the open loop file... hope i got this right.

sorry couldn't get the datalog today, it's been raining like mad... i don't mind spending a day or 2 just for this, and i really appreciate yer concern, but there is at least 7 hours difference if yer in the states and 5 hours if yer europe... i'll do the datalog on late night saturday early morning ...

well in open loop the low profile cam is still running a little lean, based on my AEM eugo which is not linked to the ecu, it's between 15 and 17. but once in closed loop the a/f is fine it averages in the mid 14's, very minor knock; 1 or 2 knock counts around 2-3k rpm but not always, the knock is ...

i did this run, but i forgot to put it in open loop. if it has to be in open loop plz lemme know so i do another run. thanks again

hmm, 30 minutes in 3d and forth, lebanon is a pretty small country ya know... either way i'll try and get it done asap. thanks again.