Hondata

Hondata wrote:There is an intermittent bad connection between the ECU and o2 sensor. Unplug and clean the ECU connectors, o2 sensor connector and the connectors on the right hand suspension tower in the engine bay.

Ok...ill give that a try...do u mind me asking how you were able to tell that from my datalogs?

sorry..added the required info... a datalog of the problem...a datalog of the car running in openloop with no problems...and a copy of my calibration..

the datalog is pretty big...but the problem starts happening around the 30 minute mark...

thanks

So I have a problem with my short term fuel trim..it seems to get "stuck" at -29% during driving in closed loop which cause my car to go lean.. it doesnt happen all the time normally after about 20 minutes of driving cruising at about 80km... if i run in open loop the car drives fine..and my a/f's ...

I read that some p08 come with egr control...I did a seach and read that the egr is not supported by s300.

My question is. If im using a p08 and I have my egr connected properly will the egr still function properly?

Im using a converted p08 w/s300 with a obd2 to obd1 conversion harness in a 1996 ...

Anybody have one to get me running? Thank you