Hondata

Thank you Spunkster

Hi,

I have two ECU (P28-G00) for the s300 upgrade.. they are different, C51 and C52 One comes with the other not.. that a problem or does it work the same with or without?
What are c51 and c52 for?

Thank's

No but it eliminates the error, so if it's OK to make the map it's good?!

CalibratEd wrote: Wed Jun 11, 2025 8:03 am Post the calibration you a running with a datalog. I can take a look at it.

-Ed

here

Spunkster wrote: Mon Jun 16, 2025 11:18 am There is no way to disable MAP sensor form the Misc section. I do not understand what you mean.

Did I make a mistake or misunderstand?

Spunkster wrote: Mon Jun 09, 2025 9:03 am That ECU does not have the circuitry for those, and the errors must be disabled in the Misc. section calibration.

Hi Spunkster, if i disable map sensor in the Misk the idle fall and rmp dead

She is here

Thank's Spunkster, but could this error be the cause of the revL at 3400 rpm?

Hi,this one

Isn't that what starts the revL?

Hello Spunkster,
The injctors are new and the map sensor too (4 bar Hondata) I checked all the wiring several times and there are no connection errors I don't know why the ECU detects these errors and and it also finds an wrong value of iat &ect temp (stock sensors)

Hi, I have a cut-off REVL at around 3400 rpm.. even though no limiter is set in the calibration. I don't understand where it comes from. Does anyone have an idea?

hi , yes Aem x series wideband and injectors specifications :

EV14 Injector, 12 Ohm, 870cc, C25, Jetronic (EV1), O-O 34 mm, Short, Long Spray End (EV14-870, Bosch 0280158209)

Maximum flow approx 870cc @ 3 bar
Short type injector (O-ring distance is 34 mm), long spray tip
Compatible with E85 ...

Calibration, is stock " d16 p28 " from S-Manager i only put 850cc in injectors paramètres

I meant that I would find one when it was ready and the car could be taken out of the garage.
For now I can't go out of the garage, as soon as I touch the throttle, stalls
That's why I need a minimum map so that it doesn't stall and can go at least 50m outside.