Search found 11 matches

by SLO-FKR
Fri Oct 16, 2009 9:57 am
Forum: s100/s200
Topic: S100 has random "miss"
Replies: 2
Views: 4002

I have had 2 different ecu's socketed by the local electronic guy..

ok, I'll try and get it to a hondata dealer... thanks
by SLO-FKR
Thu Oct 15, 2009 8:38 pm
Forum: s100/s200
Topic: S100 has random "miss"
Replies: 2
Views: 4002

S100 has random "miss"

I have an S100 with a LED that is steadily blinking.. I live a good 4 hours from the closest hondata dealer. So Im trying to fix this myself.
Here we go.. When I start the car and drive around, usually on the highway on cruise, the car randomly misses (trips, spits, sputter,skip,dip, pop) for a ...
by SLO-FKR
Fri Oct 02, 2009 7:01 am
Forum: Applications
Topic: Can S100 swap to different ECU's without retuning
Replies: 1
Views: 2906

Can S100 swap to different ECU's without retuning

Can the S100 swap to different ECU's without retuning?

I have a P72 ECU that I believe is fried. I am wanting to switch all the hondata components over to a P28. Will I need to be retuned or will everything work just the same?
by SLO-FKR
Mon Jun 29, 2009 4:16 pm
Forum: s100/s200
Topic: Boost Option on S100???
Replies: 7
Views: 8994

Boost Option on S100???

I just picked up a S100R1, S100-00574, E194565. These were all the #'s I could find on the chip. Does this have the BOOST option??
by SLO-FKR
Mon Nov 10, 2008 11:10 pm
Forum: Non-Hondata
Topic: Surface Discharge Plugs??
Replies: 0
Views: 2666

Surface Discharge Plugs??

Colder plugs are also mandatory, my best experience has been with 9 range plugs. Doug @ Hondata also turned me on to these crazy plugs:

Surface discharge plugs , also available in 10 & 11 heat ranges, best of all, no exposed electrode to melt or insulator tip to get damaged (common issues with ...
by SLO-FKR
Tue Apr 03, 2007 8:05 am
Forum: Applications
Topic: d15z to D15B vtec Swap P08
Replies: 1
Views: 3690

d15z to D15B vtec Swap P08

I have a 93 civic DX with the D15 non vtec, I have swapped in a D15B with vtec. It has a P08 ecu, I was needing to know which wires to hook up for the vtec function to work. Maybe a wiring diagram would be nice. Also is this ecu hondata capable?
Thanks.
by SLO-FKR
Mon Nov 13, 2006 10:15 am
Forum: Non-Hondata
Topic: Plug gap when spraying NOS
Replies: 1
Views: 2475

Plug gap when spraying NOS

I have a 99 Acura integra GSR. I need to know what gap to use on my plugs. When I spray nitrous.
by SLO-FKR
Wed Nov 08, 2006 9:28 am
Forum: s100/s200
Topic: Voltage drops after OBD1-OBD2 conversion
Replies: 5
Views: 4296

Still have the problem, any other ideas?
by SLO-FKR
Tue Nov 07, 2006 9:50 am
Forum: s100/s200
Topic: how will hondata react to a nitrous setup
Replies: 4
Views: 3836

I run a 100 shot direct port wet set-up/S100. My tuner said that when the nitrous is spraying the timing is retarded automatically.??
by SLO-FKR
Tue Nov 07, 2006 6:54 am
Forum: s100/s200
Topic: Voltage drops after OBD1-OBD2 conversion
Replies: 5
Views: 4296

Voltage went up about .4 after ground wires.

Also, I have my Alternator converted to a 1 wire operation.
The original plug does not even plug into it anymore. Only a 12 volt wire connects to it.
by SLO-FKR
Mon Nov 06, 2006 3:46 pm
Forum: s100/s200
Topic: Voltage drops after OBD1-OBD2 conversion
Replies: 5
Views: 4296

Voltage drops after OBD1-OBD2 conversion

I have a '99 Integra GSR with a P72 OBD1 ECU with S100. Ever since I did the OBD2 to OBD1 swap, I seem to be having a problem with my voltage dropping when I turn on too many accessories like higher wattage headlights, upgraded radiator fan, bottle heater, and bright lights.
I can't have any 2 on at ...