Hondata

Unfortunately I don’t have another car to test it on. I’ll probably send it to hondata this time after doing some more testing.

Unfortunately I’m back with a previous issue. I have an 06 Rsx with a k24A jdm engine, stock 310cc injectors, unopened engine, rbc, skunk 2 TB with all the stock sensors, stock header and cat currently running on the stock k24 91 base map.

The issue is that the ecu is just not firing the injectors ...

You should try your ECU on someone else's car using their calibration and see if it runs as it should. If it does, then you may have a mechanical or wiring problem.


Yesterday I ran the car and it was idling for a while with the kpro. It was running like normal but today it wouldn’t start even ...

I used an oem ecu when it shut off just cranked and didn’t want to start. I then plugged in the oem Ecu and it started with the oem Ecu. I then reinstalled the kpro and it fired up like normal. All this in less than 5 minutes. If something was wrong with the ecu would unplugging it reset it? Because ...

stock k24A in base 5 speed. Kpro v4. stock engine harness. No codes. I cleaned the iacv, bought an amazon crank sensor but that could also be bad, changed cam sensors, coils, ect sensor from another engine and it still didn't start. I also installed another new tps, map, new iacv and nothing.

My ...

Did you figure it out? I think mine is also cutting the injectors. It starts going really lean as it starts to stall. Then it won’t start up again. I get no codes. I sprayed carb cleaner and it would fire up for a bit longer but just stalls. The pump primes and it had 40psi.