Hondata

pgktony

Spunkster wrote: Mon May 22, 2023 11:36 am We need to see exactly how this is wired when it is not working. As you have shown in the pictures there is no way it will work.

Okay, I will provide more pictures and video evidence.

You can also rule out the ECU being bad. It currently runs with the distributor.

pgktony

Spunkster wrote: Mon May 22, 2023 10:54 am Did you de-pin the distributor connector and add the wires correctly when plugged in?

Yes. All 3 lights work on the CPR box. The sync light flashes also when trying to start. But it doesn't run. It just cranks.

pgktony

I know the distributor connector has to be connected. I just wired like this to show you how i had it. As for now i put the distributor back on.

pgktony

Here is the parameters

pgktony

Spunkster wrote: Mon Apr 24, 2023 9:06 am Show exactly how you have it wired.

Show component Q37 in the ECU.

Post your calibration.

pgktony

Here you go

pgktony

Need some help!

I have a 2001 ITR with obd2b>obd1 conversion harness. p28 w/ s300 V3. Everything is wired correctly; I’ve checked it multiple times. Had another friend check the wires with a multimeter. Even hard wired the power for the coils. Still no spark. It has brand new Denso ignition coils ...

Hondata

Search found 7 matches

Re: CPR kit installed no spark/sync

Re: CPR kit installed no spark/sync

Re: CPR kit installed no spark/sync

Re: CPR kit installed no spark/sync

Re: CPR kit installed no spark/sync

Re: CPR kit installed no spark/sync

CPR kit installed no spark/sync