Hondata

I would like to see different rev limter for each gear in the gear comp table. that way you can have every gear different or just the gears you want longer or shorter rpms. like example lots of people have to up their rev limiter cause they cross the finishline hitting the limiter in 4th gear so ...

I would also like to see the ability to lock the chip with a password so no one can open or download the file unless used with a password

also a idle target lambda would be nice to like the k-Pro

I would like to see rpms for each gear so we can have different rev limits for each gear.
This would help lots of people so you wont have to shift into 5th gear in the 1/4. also would make for 1st gear a higher rpm or whatever gear you want to change

i would like to see rpms for each gear so we can have different rev limits for each gear.

Can you use a AEM air intake temp sensor with the s300

and what do you think of those 4017s maybe we need super cold plugs in the iridium and resistor plugs. cause we all had the same problem with the 2668s braking in a perfect tuned car them put the 4554s in and runs good with out problems. we all run are gaps about 14 so if you know a good plug that ...

it wasn't my tuning. we used the same tune and put in the 4554s and didnt have a problem. every high hp cars in colorado use the 4554 non resistor plugs. As im sure you know Sam parks from import sports he uses them and in all his customer cars and Brent Levistad From PFI uses them and all his ...

NOT saying Hondata is stupid but they just need to do their testing on high HP cars to give out better info on plugs. These plugs suck that they recomend. it cost me a engine cause all the spark plugs broke cause they told me to use the 2668 plugs. all the plugs had the tab that hangs over the ...

i turn the power on and it says on the laptop its online. i try to upload and it syas upload failed please try again. it will download from the ecu. it all worked before and i took the ecu out to hook up my wideband.

i put a switch where cruise conrotol would be. i know one wire goes to the ecu and where does the other one conect too. and the FTS hooks up to that same switch right

thanks

what wires go where to hook up the 2step and FTS. im tryin to use the clutch switch.

im running the LC-1 wideband but it says analog 1 and analog 2. which one goes to the eld and which one goes to the stock O2 wire.

these are the ones that were not takin out of my P06 and that the p28 does not have. D12, D13, Q34, R135, C61, C63, Q103, R6, D1, D4, R8, R9, C7, Q2, R90, C71, J5. now these are the ones that are not in my P06 and are in the p28 C52, C51.