Hondata

Hi,

can you specify the extra datalogging sensors for the FK8?

And do they work with just updating the flashpro or is reflashing the map to the ecu necessary?


Thanks,
Thomas

Hi,

on the flashpro versions 4.4.0 and earlier the bosch tables were hidden/not editable.

Could it be, that this bug with not increasing the KFMIOP load index to 300 when you toggle the "increase air charge limit" mod was also included on version 4.4.0 and earlier?

What are the effects of toggle ...

Hi,

i wonder if the new Flashpro Mini does have some different tech specs as the original bigger design, except the smaller size and the usb-c port?
Especially better bluetooth or more memory?

There is only one sensor which is named Fuel Pressure. On the selection-menu it showed also active (white coloured) but unfortunatly did not show any numbers:

Hi,

i use the Hondata APP for IOS, Version 1.5.3.
Car is a FK8 equipped with Flashpro and the Hondata Fuel System Upgrade.

On the Hondata APP my fuel pressure shows always 0.

The flashpro datalogs and other OBD Tools (Autel) shows the correct fuel pressure.

I wonder if this is a bug, because i ...

Ok, so this table was always there on the ecu but not yet able to edit with FlashPro.

My calibration should work with the same boost now (4.0.7) as with prior hondata versions, and i have not to change the values on the second turbo limit table, right?

Still wonder what condition cause the ecu to ...

Just tested with some basemaps and it seem i find the problem:

FK8 2019 US - 93 Octane Basemap seems to work. Both values are identical:
US-19-93-1.JPG
US-19-93-2.JPG

But the FK8 2020-2021 US and all FK8 EU (2019-2021) have different values on the tables
I also choose the 93 Octane Base Maps ...

Is it normal, that the table #2 has lower values?

I talked with my tuner and he checked out my map telling me, that the new table #2 has drastically different values.

He also said, when he opens a calibration for an us-market fk8 the table values are matching. But not for my europoen-market fk8 ...

Hi,

with the FlashPro version 4.0.7 following feature was added:
[2017-2021 FK8 Civic Type R] Added another turbo temperature limit table (2019+ only)

Sorry if the question is dumb, but what is the purpose for the second table? Both table use IAT2, so which one is used on the calibration?

Those ...

Something still not function well. With my iphone app and also with the HU version on my FK8 Headunit it looses connection like every 10 minutes.

I have to unplug and reconnent the flashpro over obd. Than the apps connect but looses connection after several minutes.

This problem i had also with ...

It seems this problem is back with 4.0.5.

Today i had lost connection about every 10 minutes. If i replug the obd it works for some time and than the app loose connection and so on.

Hi,

should i also reflash the calibration on my ecu after updating the firmware from the flashpro or could this cause any harm to my custom tune calibration?

Install the Hondata Flashpro 4.0.5 and update the firmware of your flashpro. That resolved the issue for me.

Issue resolved. Thanks 👍

I have the same problem. It connects and immediatly both apps (mobile and infotainment/honda hack) crashes.