Hondata

Have you tried putting the stock throttle body back on?

Please see: http://www.hondata.com/forum/viewtopic.php?t=18527


My throttle body motor has been changed back to the original car, and I also borrowed the throttle that will not have this problem in my friend's car, but it is still the same ...

What adjustments will be made to the data in this table? Because I now have an RDX injector, a very light flywheel, a ZDX throttle, a shunk2 manifold, and I don't know exactly why, but when I go back into neutral as I'm driving, the Revs will drop below the target revs, and then surge, in the return ...

Yesterday I am done with testing and tuning the idle and Rev hang.
Thanks for the tip to enable the option to bring back the Rev hang. I mist also increase the values in the Overrun manifold pressure section because it is to low. After adjusting to higher values the engine hold the idle speed a ...

dont have idea where the problems are at

car got 410cc rdx injector
zdx throttle body
2.5 inch exhaust
header
skunk 2 manifold
rbb head
dc5 cam
light flywheel

idle drop around 0:56
strange stft after 4:00

hope some one can explain where i did worng

things i did
make change on the tb flow chart ...

Russbus wrote: Wed Jun 23, 2021 6:24 pm So it's a 11lb flywheel

Have you solved your problem? I have the same problem, which is very annoying.

OK, thank you for your reply, please take a look for me. I am afraid that the car will be in danger, now the car has been throwing a code name, P0133


I looked over the datalog and it seems the car is running lean. I modified the calibration file you provided to start as a base. When tuning ...

There is a very lightweight flywheel, RDX throttle body, Skunk21.81 l intake manifold, Acura 410cc Injector, Afe Intake, FD2 oil pump. ,

There is a very lightweight flywheel, RDX throttle body, Skunk21.81 l intake manifold, Acura 410cc Injector, Afe Intake, FD2 oil pump, enlarged rbb cylinder head ...

OK, thank you for your reply, please take a look for me. I am afraid that the car will be in danger, now the car has been throwing a code name, P0133


I looked over the datalog and it seems the car is running lean. I modified the calibration file you provided to start as a base. When tuning ...

OK, thank you for your reply, please take a look for me. I am afraid that the car will be in danger, now the car has been throwing a code name, P0133


I looked over the datalog and it seems the car is running lean. I modified the calibration file you provided to start as a base. When tuning ...

EFICU wrote: Wed Apr 27, 2022 9:51 pm Sounds good. When are you installing the injectors? Let me know and I will get the first file put together for you.

需要帮助，本田 K24交换讴歌 RDX410CC 喷油器，喷油器停滞时间数据？
感谢

Need help, Honda K24 exchange Acura RDX410CC injector, injector stagnation time data?

OK, thank you for your reply, please take a look for me. I am afraid that the car will be in danger, now the car has been throwing a code name, P0133

Now the car drive strange, always feel the power is not good, especially when the shift will be re-open the throttle will not have the strength.

This is the data that I drove for a period of time after I went out today.

I Am a novice, I do not understand these, this is a programmer to help me set up, fuel injector calibration I am not sure whether the correct