Hondata

i have the clutchmaster fx600 package

it comes with the twin plate setup and lightened flywheel

i adjusted it all the way to the right, and intermitently it will drop. not all the time, but that did help.

is there any other settings i should be adjusting to get that running smooth.?

because its a pain to come to a stop in 2nd gear and bring it down to a 1000rpm then put the clutch in, so it ...

basically, running prelude calibration, rc750 injectors current injector size, 310 stock injector size , is set for parameters. h22 engine.

what is happening is i can drive and rev the engine no problem, but when i let off the gas, and the revs come down, the car just dies out. if i rev it up and ...

it is a jdm h22a its a 94 engine. but i can not find anywhere a listing or information on stock injector would be. ive read, 235, 240, 290, 310 and even 330. so i am not having to much luck with this at all. if anybody can help that would be great.

im just curious why this is not working out for me here

ive set stock injector to 310
and current injector size to 750

but its running way to rich and will not allow vehicle to rev anyware past 3000 to 3500 rpm. it hesistates very bad, and tunes of fuel coming from tail pipe....

am i missing ...

its a stock h22 with RC Engineering Saturated Fuel Injectors and getting rdy for boost, but want to get the vehicle running with the injectors first. can anybody help me out?

do i just have to put stock injector size to 310 and current injector size to 750 and the hondata will change settings but ...

could i possibly get a calibration for a prelude h22 vtec with

750cc injectors please

thank u