Hondata

I tried to lean out or richen the maf scaling especially from 1.91v to 2.4v where the knock usually increase but it did not affect it much. Can you send a datalog which ı can look at your scatter plot of afmV and short term trims. A calibration file and list of mods will also be appreciated. Thanks.

Thanks for the reply. I also read your previous posts about it.
I tried stock maf calibration,too but it didn't make a difference. Besides I have a MST cold air intake so even though I use the stock maf calibration, fuel trims are different than stock intake. Maybe because of that it doesn't make a ...

hi,
Before I am going crazy, I wanted to ask help from you guys. Here is my cal file and datalog. As you can see Knock control stays rock solid at WOT from 80kmh to 210 kmh but around 1700 rpm and below zero psi boost while cruising knock control starts to increase all the way up to the 0.85-0.90 ...

I think ı couldn't explain myself clearly. Whatever you may name it, ı just can't put it into the analog or digital gauges on main screen because knock control is NOT in the list which ı choose sensors. Because the app for the radio is mediaeval especially comparing it to tunerview. Luckily, the app ...

2018 honda civic 1.5t uk g82 hatch. I simply cant put the knock control in the analog ot digital guages because it is not in the options. But ı can see it in the all sensors list and in the app on my phone

Hi
I can see the k.control on hondata mobile app with my phone (android) but ı can not see it on the gauges on hondata mobile on my car's navi/radio. I can only see it on the sensors list. Why cant I put it into the gauges like knock count or boost?

hi, I have just switched to hondata from Ktuner. Here is my latest datalog. Car is 1.5 cvt with a cold air intake and rev9 intercooler. 91 octane map but boost is 21 psi from 4000 to 6000 and afr is set to 11.00. everything seems normal except ignition timing. It fluctuates really a lot and most of ...

serial number: FP-16CIVIC-L15T-INT-220275
flash pro:3.9.5
ecu: 378205ang820-m1

I have been using Ktuner for two years and I switched to Hondata. I loaded base map +6 psi with some mods and raised the boost to 21 psi and torque limit to 300 nm. Then I felt it was slower than it should be so I took my first datalog. First thing I noticed that there was nearly zero ignition ...