Hondata

heres a datalog of it surging below

hey man im gonna post the calibration and a quick data log. rcently installed a manifold,Throttle body, & intake and now the car is acting up im asuuming because its getting too much air

Looking for a basemap for my k24 Rsx with the following…

Jdm K24a
6spd w lsd
Skunk 2 tuner 3 cams
Ported skunk 2 pro series manifold
Ported 74Mm Throttle body
3.5 Hybrid racing intake
440CC RC injectors
1320 headers
2.5inch Borla catback exhaust system


Just recently had the ported ...

Also on hondata k pro v4

Hi guys I ran into a problem where everytime I decel, downshift or upshift my rpms will start bouncing around. For example if i were to downshift to 5000 rpms once I release the clutch the rpms will bounce around 4800-5200 and won’t stabilize till I get back on the gas. Car also jerks a bit when ...

I’m going for a dyno soon by someone who specializes in k pro so if it can be done through the k pro itself then I should not have issues but he doesn’t offer refunds so I don’t wanna get there to find out it was the speed sensor itself and then I can’t even dyno it

Hey guys so I’m running into a problem with my k24 swapped Acura rsx the car is an 03 base has a couple type s parts in the swap as well. Anyways my speedo on the cluster works completely fine it shows my speeds accurately but when I open up hondata my speed reads 0 as I’m moving and once I start ...

Hey bro yes I fixed the problem actually what it was was that the timing jumped and the tensioner was completely shot, luckily the valves did not bend and the chain did not stretch I am currently running into another problem it’s a speed sensor problem will post a new thread right now

But we are not definite on this as we didn’t do deep digging tests yet

My mechanic thinks it’s happened due to a poor tuning job

The car did start before the tune but I was told that the time before was just for starting it and here and there it wasn’t a proper tune but it definitely started. The new tune definitely improved the car it was definitely running better idling better thing is though the one time I cold started it ...

I’m hoping my timing hasn’t jumped and damaged any other components as there’s loads of aftermarket parts in the car

Yeah the engine has loads of work done to its k24 swapped the guy replaced the cams with skunk 2 tuner cams there’s a throttle body intake fbo intake manifold headers and all that stuff. I also did notice that one the car is in accessory mode my AFR reads at 9.1. I tried loads of things I even tried ...

I recently ran into an issue where my car won’t start. I have a k24 swapped rsx running on hondata. I did a couple tests on it my compression is at 180 psi all around in each cylinder, the car is getting spark, and my injectors are spraying some fuel. I’m confused as to why my car isn’t starting my ...

Hey I need help with the same sort of issue anybody can help out