Hondata

Here is the latest. I am hoping this one is good enough. There actually ended up being some traffic late night and cut the 3rd gear pull maybe a little short.
Looking at the app after the run, it definitely looks like some RDX injectors are going to have to be my next purchase.

thedanpaldatalog08 ...

Here is the latest log. Sorry its longer. It didn't stop it when I hit button. Let me know how it looks.
Where I am in Seattle is about 100 ft above sea level.

Here is the latest. It was another brisk night here. Let me know if I should wait and do the logs on nights where its a little bit warmer and I can.

Looks great again. We will now do one with vtec at 4000, still on the 40* cam angle. This datalog can be a ten minute datalog if you want. We just need a clean third gear WOT pull in there.

The injector duty is definitely on the high side. But we will see how it finishes out and go from there ...

Here is the latest datalog. Let me know how it looks.

Here is the latest datalog. It was about 50 degrees today. Thanks again!

Last night was colder than normal, probably in the lower 30s. Most of our winter is in the low 40s normally.

Here is my latest datalog. Sorry for the delay, weather hasn't been the best to make a pull in.
Thanks again!

Thanks for the advice. Tried to start the WOT pulls a little sooner and hold it a little longer. I have an idea on a new spot so I can keep on it longer. And I kept to around 20 min this time actually.

Let me know if there is anything else. Thanks again!

Email sent.

Yeah it's really the only way to tune them right via e-tuning. It's sometimes interesting to see how different some cars can be with similar mods and even the same brands.

Here is the first one. This one will be the 0* cam with vtec at 4500. The 0 cam is the least powerful, so don't get ...

Gotcha. It would probably be better and easier to start you on my stuff to tune everything with. But if you want to start with a regular basemap you can. The regular basemaps I will have to go in and make a lot of changes to make to act how we want.

Are you okay with tuning the long route, with ...

Hi. I have a 2011 FA5. I'm new to the tuning (used to old early 90s Hondas). I have some questions or could use some help.
My current mods are:
-HR CAI
-PLM V2 Tri-Y race header
-FullRace 3" exhaust
-Flashpro
Also have the Exedy lightened flywheel, but I don't know if that matters for this.
I ...

Hi. I have a 2011 FA5. I'm new to the tuning (used to old early 90s Hondas). I have some questions or could use some help.
My current mods are:
-HR CAI
-PLM V2 Tri-Y race header
-FullRace 3" exhaust
-Flashpro
Also have the Exedy lightened flywheel, but I don't know if that matters for this.
I'm ...