Hondata

What is the max map you can set for the software

I put the engine from the 88 Integra the B20 Vtec in the 95 Integra I built and I went for a quick drive. I dataloged this I just don?t know what im reading (what it means).

Holly shit I was just thinking of taking my car to the tuner we have in town Solid Tech in Albuquerque and their expensive well I think they are I just can?t afford the 585.00 + tax that they want for a street tune. I?m just going to have to really try to learn the hondata software.

I tried to take the plug out it did not work so I decided to pull the B18C1 out of the GSR and take off the head so I can take it to the machine shop that plug is really stuck. So im going to pull the B20 Vtec that I have in my 88 Integra and put it in the GSR, I built it for boost so that should ...

Will the tap and die set work or will I need a screw extractor? I?ll try that thanks.

I have some bad news, I decided to put in colder plugs in the engine and I broke one of the spark plugs. I guess Ill be taking off the head and taking it to a machine shop.

I think I figured out the data log, I?ll post one as soon as I can.

Well for the data log I can data log but I don?t know how to down load it or watch it I tried. And for the piston and camshaft combination the compression is reduced to almost two points because of elevation. So it should be 10.83:1 at sea level but here at 5600 feet it?s like 9.03:1 or so. So I ...

I wanted to know if there are any settings I have to change to the S300 to turbo at 5,000-6,000 feet of Elevation? I?m having problems boosting. Detonation problems. I started with the B16greddy calibration and I just Detonate. Boosting 3 pounds to start off. My setup is a B18C1 with Integra Type R ...

Do you have to change anything in the Parameters after doing that ( http://www.hondata.com/techplxwiring.html )?

Need a Map for a B20B Vtec Turbo Stock