Hondata

I opened up the back of the CPR unit. This is what I found

there is continuity

I had a running car with a working OEM distributor I installed the retrofit by the instructions to the letter that are in the s300 software.

The car starts but I have zero spark on number 2 cylinder. I have swapped coils, plugs. Work on every other cylinder but not # 2.

The box has power. Ignition ...

Switched to a "known" OEM distributor.

Worked great and the car started and idles.

Thank you !!!

ok no problem. Just for data....

I upgraded the fuel system fuel line to a -10an feed and return
I tried to install Hondata Retrofit and couldnt get it to work properly. So I changed back to the orginal distributor the car ran on.

This is the same ecu it ran before. Same injector size ( 1000cc ...

yes. I just cranked it over. There is a fuel on the tip of the spark plug clearly.

I have a 2000 em1

built engine / turbo
twin hellcat in tank pumps feeding -10AN fuel rail
1000cc FIC injectors
rywire obd1 harness
hondata s300v3
speedfactory 3 bar MAP sensor
obd1 OEM distributor

I have spark, I have tested injectors, fuel pressure set to 40psi on regulator and on fuel rail, Map ...