Hondata

I don't want to hijack the thread but I'm having a very similar issue. I have the ep3 ecu and it will only read the high boost table. Changing the high/low control to always on or always off has no change and I also have a switch wired to E16 and I've tried inverting the control here as well to no ...

I'm typically not letting it just ride the rev limiter I'm usually trying to modulate the throttle to let the car catch up to the wheel speed. I also see my 11psi datalog is not what I thought it was, but the one I uploaded the yesterday does show knock in it. At 8psi which is gate I had 14 degrees ...

Thanks for the welcome! So I tried getting a decent log but the temps have gotten back down into the 40s with little sun so my summer tires aren't wanting to hook up too well. Really need to get a lsd at this point. This also has a rbc intake and NGK plugs with a 8 heat range gapped to .025. The ...

I have a turbo K24a1 with a fabricated log manifold and a rev9 tx50e with the billet compressor wheel and .63 turbine housing. End goal is 15psi currently on 11. I'm on full E85 mostly because its cheaper than premium. Injectors are FID 1000cc (900cc) on 60psi base with a DW340 in tank pump. I'm ...