Hondata

Another thing check the daughterboards LEDs. If it's working properly there should be a solid green light and flashing red. I had an issue and mine green led wouldn't come on and it was an installation issue.

I'm sorry the support is so bad here. You can follow this tech data to check your sensors

https://www.phearable.net/information/tech-area/02-04-prb-rsx-type-s-ecu-pin-out-diagrams.html

Main ones I'd check are you battery voltage and power source, they should all be the same with the key on.

Next ...

Sent it back and they fixed the install and it's working now.

So for future reference if you get clear security fail it's an installation issue.

Also to eliminate it being a wiring issue you can use a multimeter to shoot for correct ECU/sensor voltage. I followed this tech data, but if this ...

Can I get an answer to any of my questions? What other cars can I test the ECU in. The green led never turns on at any time so it's a bad daughter board correct?

Please double check the serial number on the KPro because we did not sell 60017 to HeelToeAuto


60017 is correct. I guess heeltoeauto sent it to Vip Performance for the installation. Haven't been able to get ahold of them for troubleshooting yet.

Another thing to add. When I go to download ...

Via email you said you tried it in a different vehicle and it worked as it should.


You might have me mixed up with someone else. This is what I sent you guys.

I took the cover plate off and the green led never turned on the red led would flash with ignition on.

I am trying to find another ...

Where did I say it works on a known working vehicle? Just that the car still runs the same as it did before the kpro. It won't flash though.

Spunkster wrote: Mon Nov 15, 2021 11:49 am This K-Pro was installed by VIP Performance and not by Hondata. You will need to contact them.

Okay but is there any troubleshooting I can do on my end to try to get it to work?

Who did the KPro installation?


Heeltoeauto

Tried again today after uninstalling and reinstalling kmanager. Just seems to be getting errors with anything I try.

Tried to update drivers, and it says "error updating drivers(error:)

I read through the help guide a bit. Should I try taking the ...

Heeltoeauto but I believe they just sent it to you directly.

version: 4
processor: NXP
datalogging mem test: passed
SN: 60017
main firware version: 19.00
Software version 4.4.9.0
secuirty disabled


says driver installed, online, ignition on at the bottom. ground is on the valve cover per tech data

mods:
DC5 chasis,06 k24a2 engine, rbc intake, sri

cal ...