Hondata

I will be receiving the flashpro for my RDX soon. Looking at the current available calibrations, Hondata has added a bunch since october. Hondata has added model specific and year specific calibrations as well. Aspec and Advance 2020 calibrations. Anyone have an idea on which calibration I should be ...

So we have been trying to diagnose this issue for two days now. My setup is a k20a kswap with JR supercharger using 3" supercharger pulley and 2002-2004 rsx type S crank pulley. Which the boost output should be around 11psi with these pulley combo. Before Ive made a few changes to the intake system ...

Hello all, I am sending my reflashed ecu to upgrade to kpro. I have a kpro ecu from my other car to use so pretty much need a map for me to drive home safely and get it tune after. Any suggestions would be very appreciated. Thanks in advance.

I just pulled my 03 rsx type s tan dashboard to replace with an 06 rsx type s black dashboard. Now I have the kpro for the 03, will the harness from the 06 dashboard usable with kpro without the use of the adapter? :?:

Im running a JR supercharger and having issue with the boost, I can't figure why im loosing boost, I don't think my exhaust is big enough to loose that much boost, but here is my boost datalog. Might be having a vacumm leak?

anyone interested in looking at my datalog, please give me your email address and I will send a copy. Sorry that I can't zip the file and attach it in the post

YAY! got it all worked out, thanks for the support. Just one more question and Im set. Attached is my calibration transferred from version 5 of kmanager. I can't upload my datalog, don't know why it wouldn't attach. I tried compressing into a zip file. Anyway, can you guys please take a look to see ...

Well i did it anyway, from notepad copied and pasted over to .6 version of kmanager. Lets hope it will fix my issue. Im not sure if you guys noticed in the parameters, the person that dyno tuned the car left some checks and changes things which im not sure if it is correct.
Such as:
The gearing ...

So if the tune was done on a .5 version, calibration was downloaded and saved, update the old version to .6 on the laptop and opening the .5 calibration for uploading will not work? Is it possible for me to just copy and paste all the tune setting from .5 to a .6 stock mapping then upload? Will this ...

I've used another laptop, and updated the usb. Cleared the security, and tried uploading the new calibration. I recieved an upload error. Switch back to my other laptop, uploaded just fine but the car spluttered and died. :? I believe there is a software version conflict. Will find out soon enough

Today I just tweaked the idle valve duty cycle adjustment about 2 notches from the center, during my upload, my car shut off. That was weird so i just let the upload finish up. After the upload, I tried starting the car and it will not start. The car crank up then dies....please help me determined ...