Hondata

Update -

Popped to my mapper yesterday, tested the dash on his ecu with a kpro v4, dash works fine on his ecu so that rules out the dash being a issue.

Swapped my kpro board into his ecu and the can stream drops still, so we swapped back to his board and the can stream works fine and doesn't drop ...

You may want to contact CPL Racing in the UK.


I had my ecu converted by PerformanceTek Racing , I sent it back to them in May/June to be tested to which they said they found no issues! I also asked them if they tested the CAN stream, they said they weren't able to test it as they didn't have ...

Bump

Still after some help to get this resolved

Just an update -

I'm still having issues with the Can talking to my dash, AiM keep suggesting things to try but ultimately nothing has worked. I've got no one else to turn to now for help and this entire process is delaying my build

I've even sanity checked all the bit's and had a friend look ...

Having an interesting issue again which seemed to have disappeared for a while.

Kpro4 S/N 43715
Kmanager 4.4.6.0

problems are this:
1) Green light is on, red transfer light is flashing - regardless of whether USB is connected or not
2) bluetooth is not found - can't connect Hondata app
3) USB ...

Cheers for the reply.

I'll drop AiM a email on Monday to get the tech support to look into the issue further , I'll also look into getting a can bus analyser . I'll let you know how i get on should anyone else have this issue

Sorry for the delay in replying, these are the readings I get

Kpro Ohms -

118.6

AiM ohms -

119.4

Do they need to be bang on 120 Ohms ?

The AiM does seem to get info that seems makes sense ( battery voltage is accurate so I'm going to assume the rest is )

I've tested another AiM Dash Ans the ...

Hi there ,

Sorry for the delay , I sent the ecu back to be tested ! They've found no issues, I've since got the ecu back and done the following

Added 3 extra earth straps to the engine to the chassis which seems to have stopped usb comms dropping issue

I'm still having issues with the can stream ...

Perfect, thank you I'll check these and let you know my findings

bump, i'm still after some help

Thanks for the reply

It's a brand new kpro, Is there anything I can do to check what's causing errors ?

As I'm a little lost on what else I could check other than the config on the dash and the ecu

Hi there ,

I've got a kpro v4 connected to a aim mxs Strada , I've got the can wires connected up to the aim can high and low , and it seems to be able to communicate using both the Hondata 500 and the MoTec protocol

The aim dash has the kpro v4 stream setup on my config

Now the issue I have is ...