Search found 5 matches

by ohisofly
Tue Apr 05, 2022 6:02 pm
Forum: s300 / SManager
Topic: No start - Injectors not firing and distributor error
Replies: 7
Views: 3345

Re: No start - Injectors not firing and distributor error

After putting a jump pack on the car, cranking voltage was 11.5 volts and the injectors still were not firing. It does seem like my battery is toast considering cranking voltage was in the 8's without the jump pack, but I take it there's another issue going on.

To check the distributor wiring, I ...
by ohisofly
Tue Apr 05, 2022 8:44 am
Forum: s300 / SManager
Topic: No start - Injectors not firing and distributor error
Replies: 7
Views: 3345

Re: No start - Injectors not firing and distributor error


Have you checked for fuel and spark?


It does have spark but a noid light showed the injectors weren't firing


Your battery voltage is low...dipping into the 8's when cranking. That can cause all kinds of things to go haywire...I would replace or charge your battery.


Interesting, appreciate ...
by ohisofly
Sat Apr 02, 2022 4:47 pm
Forum: s300 / SManager
Topic: No start - Injectors not firing and distributor error
Replies: 7
Views: 3345

Re: No start - Injectors not firing and distributor error

Sorry, this one is while trying to start it. Unfortunately I don't have another distributor to try swapping in.
by ohisofly
Thu Mar 31, 2022 6:07 pm
Forum: s300 / SManager
Topic: No start - Injectors not firing and distributor error
Replies: 7
Views: 3345

No start - Injectors not firing and distributor error

SManager version 2.7.8
91 Crx - ls/vtec
P06 ecu, S300v3 with BBG
Calibration & Datalog are attached

The car was running but sat for roughly two months. Without anything being changed, I went to start the car up and it just cranked but never sounded like it even tried to actually start. Spark was ...
by ohisofly
Sat Mar 27, 2021 11:24 pm
Forum: Hondata Mobile
Topic: Windows 10 or android tablet as a display screen
Replies: 1
Views: 10138

Windows 10 or android tablet as a display screen

I have an s300v3 and would like to install a windows 10 tablet or android tablet as a display screen. I've searched and seen variants of this question but not a clear answer - I apologize if I overlooked something. I'm not sure if a tablet would have to be manually connected via bluetooth every time ...