Hondata

I was under the impression that the ect2 is not utilized since it can be used for an AFR sensor

Thinking about putting a sensor in the oil pan and I was wondering if I could wire the sensor to the ect2 connection on the ecm and then display the sensors reading on the hondata mobile app.

Hi, for some reason my timing is dropping to 5 degrees then climbing back up after shifting. There is no gear retard. I can feel the power loss. Any idea what might be causing it? Happens right at tip in after a shift. Here is a log and the tune. Thanks!

Datalog shows 5v on wideband voltage even with the wideband controller not hooked up to A44. Do the pin numbers on the 2012 computer not match the numbers on the back of the connector? See pic of my wiring.

I'm having a tuner look at it tomorrow, hopefully I can get it straightened out. That's correct, there's no immobilizer being used. Thanks for taking a look at it!

Hi, the ecu and engine are a 2012 Civic Si. Attached is the original calibration (1-13-20) and the updated one (ChrisAriel...) that switched calibrations after being saved. Thanks for the help!

2016 Ariel Atom K24Z7.
Flashpro model: 2012+ Civic Si US 2013+ ILX

The base map I have has vehicle calibration listed as a 2012 Civic SI US, I sent the tune to an e-tuner who modified it and sent it back to me and now it won't upload, it says the tune is for a 2014-2015 Civic Si. The tuner didn't ...

Hi, I'm a little confused about how to hook up the wideband signal from my wideband controller to the ecu. The instructions from hondata say to remove the pin from the ECU connector?

"ECT2 (Second water temperature sensor). The Second ECT sensor must be disabled and the factory pin must be removed ...

I will have them place the order and I guess it will add to the back order they already have.

I appreciate your reply. TMI wouldn't let me order it until they got the okay from you guys. If you could please keep me posted and let me know when I can put in my order. Thanks so much!

I called TMI to order one and they told me Hondata told them the flashpro is backordered and I should contact you guys for an update on when they will be back in stock and that you have the ability to drop ship to me if they place the order. I sent you guys a few emails but haven't heard back so ...