Hondata

Does anyone know if it's possible to have the app show correct MAP reading when using a hondata 4 bar map sensor?

Replaced TPS, issue gone. The datalog below shows the smooth TPS reading, whereas the previous was all over the place.

I had a similar issue. Ended up being my TPS. Your TPS reading is all over the place in the datalog, as mine was before replacing.

Upon further investigation of Blip2, at 1:14 and beyond, seems to me something is causing the ECU to cut out. When the issue occurs the MIL comes on, and all sensors stop reading.

The issue was exceptionally bad this morning. I was able to get quite a few logs, ended the log and started a new as the issue presented itself. Looking through them I think I've narrowed it down to an issue with the TPS. You'll notice the spots in the log that will show like a 15" MAP reading, but ...

I'm pretty sure it happened between 21 and 21:05, and again at 21:50 to 22. Is it normal for the TPS to be that all over the place in the log? I will log again in the morning and try to note exactly where it happens.

Greetings!

Seeking some advice in a light load hiccup I'm having. Occasionally I will get a buck/hiccup when very light on the throttle, it is almost like I completely let off the throttle and mashed the gas again. I have attached the calibration, a datalog from a cold morning warmup, and a 30 ...