Hondata

thanks for the help..once its not -30 below zero ill see what i got and get back to ya thanks again

i have installed 2 sets of injectors my 440's and the 780's and i get the same result on both sets of injectors...i though injectors also till i tryed another set

its a usdm ecu rectangle, i installed my new distributer today and still has a misfire on cylinder 4. took out the plug the piston was damp with fuel installed new plug and still the same..im lost completely now. Anyone please help..thank you

the ecu is a p72 gsr computer

The computer does upload and datalog. I had never noticed the red light before. so i figured id see what ya had to say. Im stuck on the cylinder 4 misfirewith a code 16.new cap rotor plugs wires compression and leakdown pass with flying colors..distributer??

when the computer is turned on...the light should be green where the data cable connects to the ecu correct? because there is a red light and a green light..i only remember seeing green before not the red? am i correct or incorrect on this?

Alright so i have a miss on cylinder 4. tryed cap rotor plugs new wires. Thinking i might have a bad ecu. I tryed my old ecu from a single over head cam f22 and the h22a ran 3 times as smooth. Does anyone know of where i can have my ecu tested, there isnt anyone around here running a h22a so i dont ...

what about the chances of the injector resistor box failing? have you seen that happen before?

i reinstalled my 450 injectors still have a mis on cylinder 4. i did a leak down and every cylinder is 1%..everything looks good its making no sence. i installed new plugs and still misses. i also tryed new wires same thing. Any other ideas.

uninstall avg and everything works. thank you for your help

i have avg even if i turn it off it still wont let me install? i dont know whats its doing..it let me install it before i cleaned my hard drive and started over

unable to execute file
C:\program files\smanager\smanager.exe
create process failed;code 5
access is denied

needing software for smanager for s300..had to clean my hard drive and start over. i tryed to download the 1-3-8 but keeps saying access denied? can anyone help...thanks

compression test on all four cylinders shows 150 across all 4 cylinders. any ideas now...need help thanks

Car starts just fine but runs rough at idle. removed all spark plugs cylinder one through has carbon on top of the piston and cylinder 4 is completely clean, looks like new. after car is started i remove plug wires from one through 3 and there is a change than on #4 no change. i changed plug wires ...