Hondata

1996 Acura Integra LS OBD2
2002 k20a2 engine swap and engine harness.
2002 civic si 5-speed trans
phanetric conversion harness
PNF ECU with kprov4
RBC intake manifold, -6AN fuel lines
Karcepts fuel rail
Type-s throttle body
K-tuned header
AEM 340Lph fuel pump, the Fuel pump has its own relay ...

I'll look and update and ill add newer datalog with information

Not sure if I uploaded data logs right but they are below

alright ill try get datalog on here

Chassis:
1996 Acura Integra K20a2
Engine 2002 RSX Type-S K20a2
Transmission 2002 Civic SI 5 speed (NRH3)
02-04 Engine harness with EG Civic/DC2 Phenetic Conversion Harness
ECU 37820-PNF-A11, 05433-3415 Kpro V4 Whiteboard #43710
Using k20a2 PRB base map with necessary settings disabled and ...

can you add all stock kseries injectors deadtimes both 270cc and 310cc
cant find stock k24a4 injectors never had 310cc or if i new math problem to solve i would
do it that way

No one has anything similar? not one person?

stock k20a2 and k24a4 injector latency dead times can any one help?
my stock injectors failed and i got set k24a4 injectors need to know information on them?
which kseries injectors are 310cc and which are 270cc?

I was looking for a map with a close setup as my car in the kpro vault
found some while searching but how do you save and use them then?

Also if I clear ECU security do I have to register my ECU?
my kpro says up to date but never updated firmware in a long time or clear ECU/security ever.

Integra ...

What's the best base map .kal to start my car and use to get the car to the tuner?
Also looking for correct readings for sensors whether its temperature, voltage, percentages I want to compare my readings
No check engine lights except for the secondary oxygen sensor which is turned off
If anyone has ...

I'm try this .kal
I have a Integra with K20a2 RBC, Ktuned header, 2.5EX, With AEM 340 pump stock injectors. Trans 2002 civic SI 5speed my ECU is PNF/Kprov4. It idles somewhat but under acceleration cuts in and out plus.
Need more learning

Maybe my issue is I never 0 out my map.

No old post but did you ever find out the issue u had with no power and fuel pump not priming or turning on..

I'm in same situation I parked my car last year for winter everything was good tried to start to night ignition only no pump priming or power to ECU kpro wasn't even lighting up and all I ...

Alright Ed sure thing Let me finish up my new mid-pipe and exhaust and ill get the file as requested appreciate the help

Car 96 Acura Integra
PNF ecu with kproV4
K20A2
RBC with 3.5 aem map
Ktuned 72mm throttle body
Stock 310 injectors
Walbro pump AN feed and return lines
Plm header with megaphone to a 2/1/2 exhaust
Headstuds karcepts fuel rail
Can submit datalog if needed have couple using stock Kal for RSX Type-S ...

Did you ever figure your problem out? I'm having the same issue? everything set up the same as u