Hondata

Positive. Even when car is on and 'datalogging' , it doesnt read anything. There is a CEL but the Error codes all say 'Not Supported'

Car seems to be in limp mode, since it cuts off at 3k for a rev.

First image is just showing the sensors not reading, key is in ACC mode

Second image is car actually on and running.

BUT even with the tune attached on previous post (on how you mentioned to put a 2k rev limiter) it still didnt work for some reason.

Spunkster wrote: Mon Sep 28, 2020 1:04 pm Is this in a different vehicle?

Same vehicle

And for some reason, once turning off the car, I heard the ECU beep twice (1 min in between each beep) .

Not sure if thats a concern or not

Spunkster wrote: Mon Sep 28, 2020 9:21 am It shows that it is online, but the ignition is off. You should try this ECU on a different vehicle and see if it shows that the ignition is on.

This is what it says when the car is actually on

Just tried this tune attached, and rev'd it (expecting to limit at 2k rpm) but it went past it

and this is what I see

Spunkster wrote: Tue Sep 22, 2020 11:37 am Have you uploaded a calibration to the ECU since updating the software?

Yes, I have. But I cant tell if it works since no sensor data appears when 'datalogging'

the K20a2 + Hondata kpro is the swap set up i am using on my DC2 Integra

Spunkster wrote: Thu Sep 03, 2020 9:06 am When was the last time that this was working?

Have you tried the ECU in a known working vehicle?

The K20a2 and the Hondata Kpro v3 we're taken both off a 2002 Acura RSX Type S. I drove the RSX for a couple of months no problem. Which is why I dont know why its not reading any sensors

Serial Number - Kpro 13175
Software - v4.4.4.0

Hi everyone,

Set up:
Kpro V3
2000 Integra Gsr w/ k20a2 swap
Hybrid Racing Conversion Harness
RSX Type S stock harness

Made all the connections needed for everything to work from the conversion harness to the RSX Type S engine harness.

ISSUE
[] When i plug the Kpro onto my laptop, and start ...

Really in need of some help to get my Integra out on the road with a regular drivable tune!

02 RSX Type S k20a2 swap
Kpro v3

Mods:
Hybrid Racing 3in Intake
IACV Block off plate
Skunk2 Fuel Rail
Skunk2 Intake Manifold
Skunk2 Throttle Body
PLM Headers (4-2-1 Tri-Y)
2.5inch Fujitsubo catback ...