Hondata

Post a picture of this wiring.


Used original OEM connector, wires, and pins. The black pin got placed into the original location after heat shrink (top far right on connector)

https://i.ibb.co/rKwzNVmt/IMG-4447.jpg
https://i.ibb.co/fzk3ds7b/IMG-4448.jpg
https://i.ibb.co/5XFhD7kZ/IMG-4449 ...

They should be correct. How did you remove the resistor box?


Using the connector from a spare resistor box, I spliced and connected the 5 wires together and plugged it into the engine harness where the resistor box normally goes.

I’m getting 12.04 - 12.05 V at all 4 injector connectors with ...

Did you have this error before the injectors were swapped?


Nope was running fine on the stock H22A injectors with the resistor box with no CEL.

Are the preset injector dead times for RDX 410cc in the S300 software correct/ efficient? I chose it directly and uploaded it to the ECU, I did not ...

Would the different behavior of the RDX injectors trigger CEL 16?

Hello, I thought I’d ask here to get a good response or relevant links to my situation.

I’m currently tuned on S300 V3 with the stock H22A injectors. And I swapped to Acura RDX injectors 410cc. Is the programming as simple as - Parameters > Fuel Injectors > changing “Current injector size” to 410cc ...