Hondata

Problem solved. I had the injectors cleaned but it was not them. I had the car tuned and now it runs and idles great. thanks

Ok thanks. I will have them checked

no, nothing at all.
I did a datalog. I noticed that before it stalls on the cold start up, my a/f is 10.7 and the inj is 12.09. And I did notice that a trip I took last week I used a large amount gas. I went like 45 mile and used almost half of a tank of gas. So it seems I am dumping too much fuel ...

I have rsx type-s stock motor, greddy turbo,3" exhaust. Car has been running fine for a long time. then a few week ago when I did a cold start is ran for a few seconds spudered then died. Tried starting back up same thing. then the third time when it spudered I reved it to like 7k rpm and when the ...

03 rsx type s with greddy turbo kit. for lean protection 1, what would be the best settings?

also is it necessary to have lean protection 2 selected? if so what would be those best settings?
thanks

Well I still have this problem. As long as I am not wot it stays connected fine. Everytime I try to datalog, soon as I hit WOT, I lose connection. If I just unplug the usb cable and plug it right back in, it connects and is fine. that is until I hit WOT again. And I am using a newer dell inspiron ...

I hooked up a GM 3-Bar Map sensor. I changed the setting in K-pro to the Neetronics 3 bar setting. Car will not start. I pluged the stock map sensor back in and car starts fine. I am almost positive my wires are correct. What else can it be or what shoudl I check?

Mods:
Greddy turbo
FMIC
K-pro ...

[quote="Spunkster"][quote="m4nfred"]anybody found a resolution or something to this[/quote]

What cable are you using?[/quote]

I am using the one that came with my K-pro, which I got about 2 months ago.

Greddy Turbo Kit at 8psi
Hi-flow cat with 3" cat-back
750cc RC Injectors

I forgot to mention. After I got the first mis-fire code i thought I was running rich, which I was. So I replaced the plugs with NGK BKR8EIX and removed some fuel. Then no misfire codes for abouth 3 days. then they came back and have not stopped. i have not checked my new plugs yet, but they are ...

I am getting misfire codes almost everytime I drive. I have a k20a2 with the greddy turbo kit running 8psi. kit was just installed a few weeks ago. After fixing my idle problem, now I am getting misfire codes in all cylinders and a random misfire. All at the same time. It always seems to come on ...

[quote="Spunkster"]What spark pugs are you using? Brand, part number and model number.[/quote]

I am using NGk Iridium BKR8EIX

I just got k-pro about 3 weeks ago and I never have a problem with connectivity. But what is happening is I am OK as long as I am datalogging without recording. But once I start recording, I lose connection and it goes off-line. I only seem to go off-line when I to a WOT run. If I drive normal its ...

[quote="ikon671"]okay its been almost a month and I can't figure out why my car is throwing this CEL ( misfire in cyl 1,2,3,4 and ramdom misfgire. I cleared the dtc and it comes on again during normal driving. At first I couldn't figure out why it was throwing the Cel cuz I could not hear or feel a ...