Hondata

Thanks. Everything is working now.

I just updated from V3.9.3 to V4.1.3. With the laptop connected to the FP, but not to the car, I downloaded the tune and uploaded it back to update the version. I get the following message: "This is not the vehicle the Flashpro was locked to."

Looking at the history tab, I see the following: screen ...

With the engine off, does the FlashPro unit shutoff too if it remains plugged into the OBD2 port? If it remains "ON", how many mA does it draw?

Presently when playing back a datalog, the calibration tables show which cells the ecu referenced.

Would it be possible to leave a trace of the path? Something like a breadcrumb trail left by Hansel and Gretel.

Thanks.

Thanks!

When I analyzed the datalog further, TC Slip goes over 10% and sometimes 20%.

I happen to have made a test with VSA fully off and cruise control off. Traction control seems to be working. Traction Control Target Slip is set at 6%. It is a 2nd to 3rd gear pull.

Observation: Boost is maintained. I feel an almost imperceptible power loss. It seems to be doing the "Fast Torque ...

Also please test the functioning of the rolling anti-lag by enabling that in software and then briefly pressing the cancel button when cruising at over 2000 rpm. You should feel the engine misfire.


It may take a while before I can try that. We are not allowed to leave our homes due to a COVID ...

What do you mean by being done the slow torque method?

Post your calibration as well.


Here is my calibration.

Slow torque method is as described in the FP help file. I quote it below:

The difference between Hondata software traction control and factory VSA is that the factory VSA reduces ...

jimalan1989 wrote: Tue Mar 03, 2020 7:52 pm i have had my flashpro do the same from time to time, i usually just unplug and re plug it back in and then it works fine

I do the same thing. Just unplug and re plug the USB.

I've downloaded version 3.5.3.0, updated the calibration on the FP, and re-uploaded to the ECU. Traction control is still being done the slow torque method.

Attached is a log.

ECU is 37820-5BF-M03.

My traction control doesn't seem to be working too. I installed the 93 Octane, exhaust, intercooler tune. Traction control came checked. Nothing was changed. FlashPro Ver 3.4.8.0

Cruise control main switch was off (not lit), I went WOT on 3rd gear. When traction control lights up, the car bogs down ...