Hondata

Hello, did more two dattaloger.

See if you get to see the error.

Regards

Paulo

I find strange, when I made the datalog it generated an DTC error.

I will do again.

Doesn't really have sense the problem. I don't also understand because it generates DTC.

Regards

Paulo

Ok, after to accelerate and to fill the turbo leave the car to walk with any march clamped without accelerating. In this condition the motor cuts and it generates the DTC code.

Thank's

Paulo

Hello, here is the log file and the calibration

Thanks

Paulo

Hello, installed a S300 in a P30 ECU Civic VTI engine B16A2 93 turbo.

In Cut off it ties the light of the check engine.
It doesn't generate DTC error code.

Because this happens?

How do I do to solve?

Thank's

Paulo

Hello, am needing the pinout wiring harness of the honda D17 ECU PLM.

Does anybody can me to help?

I need to also know that type is the sensor of rotation of D17.

Regards

Paulo

Thank you
I had already read the tuning guide.
It is that is first S300 that I install and I am with difficulties.
My English is very weak.

Would like to see a ready calibration to visualize how it was done.
Leaning that would be like this easier to understand.

Even so I thank the help ...

Hello, am needing help.
I am already working in this civic the whole week and I don't get to have a potency earnings.
It is the first time that I work with S300 and cars honda.

Does anybody have a calibration for me to see how I should modify mine?

At once I thank

Paulo

Ok Thank you for the answer.

I found the problem.
I enabled reltime update and I thought that with this the modifications of the parameters would be in real time. Then, I made the up load and it solved the problem!

I don't have experience with honda. How should I modify the vtec and the other ...

I am installing a S300 in a Civic VTi 94 ECU P30 I have the following problem:

" The engine will only rev to 3200 rpm "
The error is in sensor MAP and injectors.

According to Hondata UK ecus it is necessary to disable the error codes

I didn't find in the manual as doing this.

Does ...

I am making a piece for adapting the distributor honda in VW.
Like this these with these sensor ones won't have problems.
The others are easy to adapt.

An injection aftermarket that makes what the Honda with S300 makes cost much more.

For this reason we are adapting her...

Sds

Paulo ...

Ok!

I have urgency in finishing this car because soon it begins the championship of dag race.

I will seek for here since you will travel.

As soon as returns, please verify if you have the harness and all is going me to cost.

I thank your help.

mail me.

Best regards

Paulo
paulo ...

Thank you very much!!

To use the adapter is not problem.
Do you know me to say how much cost un it harnesses there of the 99-00 in the USA?

Sds

Paulo
paulo@alientech.to

Ok! Thank you!

My problem now is with the Wiring-harness.
The civic that I can remove the injection system is automatic transmission and the Wiring-harness is part of the group total of the car.
Does anybody know how to find out in the civic mechanical transmission the Wiring-harness of the ...

Hi, am adapting P28 ECU with Hondata S300 in a VW and would like to know somebody it already adapted this ECU in VW 4 cil.

Would like to have information of as it was made the distributor's adaptation.

Excuse my English.


Thanks

Paulo
paulo@alientech.to