Hondata

Im not talking about the analog outs, of course i can use these, im talking about a serial out so there is no issues with voltage offsets and random readings. Plug in the USB from innovate, LOG, job done.

I know this is possible, just wondering if Hondata are working on it and if/when it is likely ...

Is it possible yet to use the Innovate LM2 serial connection to log AFR within Smanager ?

Will do Spunkster, but may have trouble finding another OBD2 car.

ECU is Hondata supplied OBD1 ecu with OBD2 sockets ( Black enamel cover )

Hi all

Looking for some help with a CEL9 for cylinder position sensor,

Car is a 2005 Civic Sport with B18c5 and TWM ITBs, Hondata S300.

Has run fine for months, now throwing CEL9 and running poorly, checks i have carried out -

Checked resistance of the 3 sensors at dissy, all ~400ohms
Checked ...

Thanks Spunkster, thats what i thought.

I know this isnt a Kpro related problem, but you guys have lot of experience with this system so thought i'd ask here for advice.

Having a problem with a K20 CTR JRSC @ 10psi, the boost continues rising past 10 psi in relationship to RPM upto 16psi or so if i took it that high. The car has a 2.25 ...

I will log the knock through dyno and continue adding timing as normal, will report back with dyno logs when customer returns.

Hondata - I assume this means there is no active knock control, and the knock features are to be used as tuning tools only? That being the case why do we have a 'knock ...

Attached, i dont have a log at 7psi as we soon changed out for the 10psi pulley. Please ignore the belt slip problem, we are working on this before mapping resumes.

Timing is VERY conservative at the moment until i resolve or get confirmation on this knock issue.

Car is using 99RON fuel.

Why isnt ...

Hi guys.

UK spec CTR k20 with JRSC @ 7psi.

Knock count is almost constantly increasing at all load rpm sites, but no knock is audible with my Phormula knock detection kit. The car has uprated motor mounts/insterts and i suspect that this is the cause of the high knock count? Is there any way to ...

Changed lean protection to 6psi and 300ms trigger time at 13:1 and it seems fine, now to find the cause of the missfire.....

D'oh, ive actually read that LOL.

Cheers

lean protection 2 maybe causing the rev limiter, I'll try this out now. Any ideas on missfire?

Changed plugs and the dissy is under a year old non OEM replacement, maybe a crappy dissy?

Hi guys,

My car has developed a wierd problem, there seems to be an intermittent missfire under higher boost that isnt apparant at lower boost, though nothing has changed withthe car and i havent had any problems previously. If the car starts to play up during acceleration and i change up a gear ...

Hi guys, i keep detecting a virus attached to the smanager.exe file. Detected with AVG Free.

Hi guys,

Can Hondata use a permanantly installed wideband ( d10 ) signal to make o2 corrections?

Or is the o2 wideband input only used to display lambda trace?

Thanks