Hondata

Hondata? is the RV6 base map provided in the selection good enough to use as a starting point?

*Update* Took the down pipe off to look for any blockage or restriction at the wastegate flapper and there was nothing. Disconnected the electronic wastegate actuator from the arm, checked the flapper by hand it moved freely as it should. Reconnected the electronic wastegate actuator, used a scanner ...

Thanks for the input, just saw that in the logs after you mentioned it. I'll do some digging but being that it's an electronic wastegate, there isn't much to adjust besides the calibration procedure.

Model: 2023 Honda Civic Type R

Modification: RV6 exhaust, PRL intake, PRL intercooler, AWE exhaust,
DW 430lph low pressure fuel pump, XDI high pressure fuel pump,
XDI 2000cc injectors, RV6 660AS Turbo upgrade, Hondata Can-Flex kit.
Hondata Flashpro

I seem to be hitting some sort of limit on ...

I have a 2017 CTR with bolt-on's, PRL flex fuel kit and the Hondata Fuel System upgrade. Started on the Hondata base map for 93 octane making sure timing was safe and fuel trims were within +/- 3%. Switched to E60 and started working with boost and timing. After a few pulls and adjustments, it made ...

yeap, notice that as well when i sent the logs. Found that something chewed up the speed sensor. Thanks

here are 2 logs. First one is WOT from 2000-6000rpm. Second is cruising at 3300rpm. VTS will not engage

07 6spMT Acura TSX
JDM k24 3 lobe swap
Flashpro current 3.5.3.0
Short ram intake, header, exhaust

Tune the low cam and everything is working fine. VTC operation is also working fine as well. When commanding 0,10,20, it showed each degree on the data display. Set upper and lower to 3000rpm and vtec ...