Search found 6 matches

by Ratio
Fri Jul 21, 2006 2:39 pm
Forum: K-Pro / KManager
Topic: 2005 and KManager
Replies: 47
Views: 30071

I have been having the same problems. I will try to get a datalog soon. I have had sometimes very rapid and frequent jumps in the speedo. Just like 640k I have had my speedo jump significantly twice in one 3rd gear datalog but I do not have the log anymore. Should I be sending my ECU to you guys? I ...
by Ratio
Thu Feb 09, 2006 12:08 pm
Forum: K-Pro / KManager
Topic: problem w/k pro a little long but I NEED YOUR HELP
Replies: 5
Views: 3583

They are not torn up. Just the outer layer is peeled a little bit off of two of them. But they were very close together so I am guessing the signals were jumping so they make this liquid stuff that you just dab on it and it drys to seal off the broken area of the wire
by Ratio
Thu Feb 09, 2006 11:06 am
Forum: K-Pro / KManager
Topic: problem w/k pro a little long but I NEED YOUR HELP
Replies: 5
Views: 3583

I will try to reload everything like you said and test it one more time. With the stock ecu the speedometer works and I don't run in limp mode so I can't tell if the CEL is from the o2 sensor heater malfunction that I have known about and just let it be or if it is P0010. I need to get the codes ...
by Ratio
Thu Feb 09, 2006 9:57 am
Forum: K-Pro / KManager
Topic: problem w/k pro a little long but I NEED YOUR HELP
Replies: 5
Views: 3583

problem w/k pro a little long but I NEED YOUR HELP

This is on a 2005 type s w/kpro. I sent the ecu that I purchased that was K Pro'd back to its original owner so that he could go to acura and get his immobilizer recoded. It was back within a week and so I decided to put it back in. When I was taking one of the clips out of the stock ECU I ...
by Ratio
Sat Dec 24, 2005 4:20 pm
Forum: K-Series Reflash
Topic: rev limiter
Replies: 1
Views: 2972

rev limiter

If I just wanted to bump my rev limiter to 8,600 or 9,000 once i get my valvetrain done could i get only the rev limiter bumped by a hondata dealer?
by Ratio
Sat Dec 24, 2005 4:19 pm
Forum: K-Series Reflash
Topic: 05 K20Z1 motor running on K20A2 ECU
Replies: 4
Views: 5132

Well the cam serial numbers for the type r match those of the 05 type s.