Hondata

Hi!
I have a 1991 Honda Beat PP1 with the square ecu P36. It's a 3 cylinder 656cc Kei car.

Will the S300 work on my ECU and would I be able to tune it?

It looks like the ECU will accept the socket and datalog header.

Thanks!
- Jason

Hi!
I've got the TL Flash Pro and I wanted to see if I could purchase an to allow E85 tuning?

Feel free to PM me.

Thanks!
- Jason

Never mind. I fixed it. Admin, you can delete this post

Hi!
Can you remove the P0506 (Idle Control System RPM Lower than expected) and P2176 (Throttle Control System Idle Position Not Learned)?

I swapped in a J35a6 with 11:1 RL pistons, cams, and heads into my 2003 Accord 6-6. And after I break in the clutch and rings I’ll be putting my Eaton ...

Email has been sent.

Thank you for your help!

- Jason

Boomslang. Cost me $600 and bought it brand new

Oh, like physically inside the flash pro unit?

It’s a brand new unit bought off the website. Not used or second hand if that makes a difference.

I have HDS loaded on my laptop. If you want I can take screenshots of that.

The biggest thing is that I put RDX injectors in it so I can’t start the car even to back it out of the garage.

Let me know if you want to see another picture shows the immo is synced

Same thing.

ECU
i- OBDII: Not Connected
i- VIN: (blank)
i- Calibration ID
i- CVN 0xFFFFFFFF
!- Binary: Unknown

The only other car I have is a 2019 Honda Fit.

I have a 2003 Accord V6 6MT with a boomslang harness and a84 ecu.

I can access the ecu through Honda HIM and HDS but flash pro manager has red x through ECU and OBDII.

I double checked the can wiring is connected right (behind the passenger airbag and then to the dtc).

I synced the immobilized ...

What time units are used in the Injector Opening Time? Are they MS or something else?

Stock in the Calibration Window:
Voltage: 6.00 8.00 10.00 12.00 16.00
Time (us): 3274 2092 1454 1102 694

My injectors are:
Voltage: 6.00 8.00 12.00 16.00
Offset (ms): 2.3944 1.2923 0.5413 0.1811

Thank you!