Hondata

Or just to let you know Derek my car has been running great for 3 days now.Thanks gaing for all the support.
Here is my concern I got the RSX ecu from you and have just unplugged the immobilizer and have yet to take it and get it reset.But have found a guy on our site with the same issue and he was ...

Thanks for working it out with me!! I take back all the bad things I said and thought.
+1 for HONDATA!!!!!

you cant even post your answer on the right persons forum I think this Hondata post is to me not this guys post!!

Try cleaning the IAC valve.Or adjust the slider in the idle tab of Kpro.

Talked to matt and its on its way!Shipped UPS blue you will have it by noon on tuesday.

Called Matt today and talked to him I will call him tomarrow and make arrangements to send my ECU back to you guys to have it checked.
I am not sure that there was ever a injector wiring problem.I did all the checks in the honda manual and it showed the wires to be ok and showed to change the ECU.I ...

Becuase #4 injector has 12V going to it from the time you turn the key on till you shut it off.All other injectors have .15 for 10 seconds then 0 till you crank the engine.That voltage is holding the injector closed all the time.I checked continuity from the injector clip to the pin in the ECU ...

What is Hondata phone #. I think I have a problem with my Hondata ECU!!

can you be more specific on how to do that?

also how do I view the datalog that I saved and posted?

so what do I need to do for that?And do you need a datalog with driving time on it and it will code again if you need it.The mil started flashing each time it misfired.

Greddy 550 cal also did a compression test on that cyclinder and its like 175-180lbs.

ok ran the car for about 60 miles came home sratred 2 hours later and it was missing then got code P0304.Swapped plugs,coil pacs and injectors and checked injector wiring and still #4 misfire.Here is a datalog with it misfiring.
This car is pissing me off.

is there a test for the injector?

its not the coil pac switched them and no difference
swapped plugs around and it didnt move with the plug so thats out?