Hondata

Thank you as well Spunkster !

Yes and all thanks to you ! I still need to get my speed sensor working properly before going on any kind of test drive. But as far as starting up and idling on its own with decent “afr’s”, I couldn’t have done it without your help Ed! Thank you so much

No it hasn't done any weird activity at all. Idles go as low as 12.3 and go as high as 13.6 13.7 in afr. I have recorded the wideband gauge itself as well because i figured Hondata could be showing the wrong data as well.

Here is log after going into settings like Spunkster said as well as connecting wideband wire to ELD 15 pin on D connector. Fingers crossed i did it correctly.

I am trying to hook up the wideband via ELD 15 wire(which is hooked up) but i cannot find how to do it in Hondata itself. Kpro is a green board , not white board as discussed earlier but no write-ups on setting this in Hondata. I did upload another datalog for you to see after swapping Cam sensors ...

Latest log with a decent amount of idle time but held throttle to get to steady idle.

Truly God Sent !

Here are the 2 datalogs while holding throttle to get an idle and the calibration used

Thank you for all of your help so far and for future business as well !!

Now I have gotten the Gauge working, opened back up the fuel pump to check the o-ring (I had issues here before which was lacking fuel to front when I first got the car) and the o-ring was unseated ! Fixed it, sealed it and ...

Okay I have just set up my wideband but i am currently hooking it up to Hondata so that way everything can be seen through Datalogging. I also put a stock calibration onto my computer instead of the map i provided and i am getting the same results but maybe i can try to pull/put fuel to get the car ...

I am using the map that came with this setup, but the datalogs are not showing in order for some reason. First is the "BeforeBatteryDied" and then after is Running After Priming Key Few Times. Makes me start to think of fueling issues

Update:

I installed serpentine belt and got power message gone on the Kpro. But I still can’t rev or give any gas other then what the car is idling at. Also idle went down to about 2/400rpms from Kmanager.

Yes, alternator is not in use at the moment. Just brand new battery with jumpers connected to a running car I have here. The only reason I haven’t hooked up the belt is because im sourcing AC Compressor bolts that weren’t given to me to run my belt w/ all accessories. Once I can locate the bolts ...

Hello guys and thank you in advance for your help.

I got this Rsx from a buddy some time ago and i decided to start trying to get it running and road-worthy.
The full list of what is done to the car:

JDM K24 Longblock
02-04 Type S LSD Transmission
Competition Stage 2 Clutch Kit
RBC Manifold with ...