Hondata

Ok just tested to see if there is .1 to 4.8 volts coming out to the sensor and there is no voltage at all with the key on so does this mean the ECU is not putting out the voltage its suppose to or is there something wrong with the K-Pro?

TIA,
Jayson

OK, here it goes, I have a K20a2 in my 03 civic coupe and it runs and I got everything to work right except this PO118 DTC code for High Sensor Voltage. Its a LX Model so the ECT pin isnt in the C101 plug pin 9. Its in the RSX engine harness but not in the body harness. I did switch the ECT sensor ...

Ok, thanks for the info I will recheck all the wiring and the pinouts again.

Thanks,

Jayson

Oh yea I almost forgot, at one point it did say ignition on and it started to jump back and forth from on to off like almost every second. Also this laptop doesnt have online access right now so I dont know how to clear the security if I had too.

Thanks,
Jayson

Ok, Im new to this K-Pro stuff so here it goes, I just received my K-Pro today and loaded the K-Manager like I was supposed to, followed the directions to the letter, so needless to say everything loaded just fine. I plugged the usb cable in, then plug the harness in the ecu and it doesnt even ...