Hondata

Installed krpo on a 2004 s2000 along with the corect IAT, sensors, and wheels. Everything went good until I tried to start the car when I got -P1362 TDC Sensor No Signal-. So I pull the valve cover and check the new TDC wheel on the EX cam and the new TDC sensor and everything looks good. So I then ...

we have a 06 RSX that we put Kpro on a while back. The transmission was broken from 2nd gear letting go. We got a 07 SI tranny and swapped it in because it was cheap and had LSD. Now the speedo is going crazy and when we log with Kpro the speed goes to 140mph by the time you are at 20-30mph. Is the ...

we have a car with the same problem

Spunkster wrote:No you should still use an 02-04 harness and transmission as we have always recommended.

what else is different that makes it not work?

we have a K20z going in an EK that will not be using any factory gauges. We only need the speedo for logging speed with Kpro and nothing else. Can we use a 05-06 Kpro so we dont have to change out the tranny case for the old speedo?

when using the AEM 3.5bar can we use the 5bar view and rescale it or do we use the 3bar view and scale that?

is 62/36/2 silver-bearing solder ok to use or can it cause problems?

are you using the Element o2?

so if we run Kpro in an Accord (or any other K car thats not the RSX) do we have to get the RSX type-s O2? Or like the Element 36531-PZD-A01

does the 03 Accord front A/F O2 work with Kpro? The part numbers are very close 36531-PRB-A01 (RSX-s) 36531-RAA-A01 (K24 Accord)

will I have a high CR allmotor K24 and it seems like the spark is giving up above 8500rpm. I know other teams like the clutch masters team are using them on there engines.

anyone have a wiring diagram for setting up aftermarket coils like msd ss blaster to work with Kpro?

ok after being up until 2am we found the problem. The customer brought us the car with the RCs already installed. The work we found under the tape and not good. Fixed now

its not just a little to much its flooding

I am having a problem with some rc750 sl4 injectors. They seem to be dumping way more fule into the engine then they should be. Has anyone else had a problem with these?