Hondata

15 years later...

Did this ever get done?

If I understand correctly, this car requires a 2002-04 PRB ECU, modified by Hondata and using an adapter harness...

I have a customer using a Civic Si ECU (PNF) with the Kpro installed and the Hondata harness, but during the tuning session, the camshafts would not move from 50 degrees and the ECU ...

Installation is fine as the car was working and then started having this issue.

What are the customers options?

1 - Contact AGN Motorsports for troubleshooting assistance?
2 - Contact Hondata for an RMA repair/replacement?

Thanks!

KProv4 #53538 installed in a PND-A05. The problem started by failing to start with a solid CE light and the customer would tap on the board, D2 LED would turn on and the problem would go away. Now the car does not start at all, has a solid CE light and green LED D2 does not turn on. I removed and ...

Yes, thanks!

I've tried from different PC/Laptops and the drop-down is always blank.

Wow - that's it!

Thank you so much Spunkster you are my hero.

S300 #44642
Smanager v2/7/8/0

Smanager datalogs fine.
I can upload a new calibration and it uploads fine.
I verify the calibration has uploaded using different VTEC engagements which I test on my car so I know the calibration is being updated on the S300
When I download the calibration, the tables ...

Done - tks!

Yes - that's the first thing I checked

SManager v 2.7.8.0

S300v3 #57656

I have an S300 that has a blinking red D2 and a green D4 and the ECU is in limp home mode.

I tried the S300 in another ECU and the problem persists.
I tried another S300 in the failing ECU and it works fine so I'm pretty sure the issue is with the S300

I can ERASE the S300 and the result is ...

Spunkster can you assist me with this?

Hi I have a red KPro board that needs the 4-pin and 5-pin connectors replaced (see pic).

Can you send me the part numbers of those connectors to see if I can buy them locally or at Mouser, Jameco or Digikey?

Thanks in advance for your support!