Hondata

Hi,

I re-indexed the columns (starting from 1%) and now the cell highlighted at iddle is in the 2% column !

That is crazy! It looks like there is an offset ; do you know where it can come from ?

Thanks

Hi Spunkster, any feedback regarding my issue ? Thks

Any feedback please ?
Thank you in advance.

Any feedback please ?

Here are the datalogs :

Iddle cold : Iddle warm : Iddle hot : Thank you very much in advance for your feedback.
Aurèle

Calibration attached : SK2 tps08 modif RC310 7.skl
I don't have any datalog available right now. Will do as soon as possible.

Yet, don't you have any idea on this issue ?

- TPS setup throttle : MAP at 0.6BAR throttle fully closed and 1BAR throttle fully opened.
- MAP sensor actually reading 0 ...

Any feedback ?
Thks

Besides, my calibration is TPS based with 0,1,2,3,8,12, etc... first indexes.

When throttle is fully closed (0% TPS shown on the sensor), the highlighted cell (at iddle) is in the 1% TPS and not in the 0% TPS column! Why ?

I carefully checked TPS parameters (voltage fully closed and fully open) as ...

Hi,
Why is the ITB basemap TPS table index range from 1 to 40%
How do you adjust/tune iddle (0%) and high load (above 40%) ?
Thank you, Aurèle

What do you mean by "adverse reaction" ? Could you rephrase just to be sure to understand you well ?
(Sorry, English is not my mother thongue.)

Hi,

This car is for street and track.

I thought the ITB were getting to much air too. We will resynchronize them.

Besides, I finally managed to get the iddle down to 1100RPM but ignition is at -4 (AFR is around 14,7).

Do you think such change in advance from iddle to moving (-4 to ~+20, etc ...

Hi,
Please see below topic.
viewtopic.php?f=20&t=21406
Any help would be really appreciated.
Thanks

So, no feedback, advise or recommendation at all regarding this issue ?
Yet, I noticed calibrations and datalogs have been downloaded...
Help please!

Hondata, Spunkster and any other tuner expert, any advise, recommendation or feedback on this issue ?
Thanks in advance

Hi, any feedback/advise regarding my issue ? Thanks