Search found 4 matches
- Sat Jun 17, 2023 3:39 pm
- Forum: K-Pro / KManager
- Topic: AFR values stuck at 11.5 range no matter what
- Replies: 5
- Views: 4262
Re: AFR values stuck at 11.5 range no matter what
What was the cause of this? My Kpro v2 is doing the exact same thing.
- Mon Apr 17, 2023 11:00 am
- Forum: K-Pro / KManager
- Topic: P1361 TDC Code, timing at -20 deg on startup.
- Replies: 2
- Views: 1238
Re: P1361 TDC Code, timing at -20 deg on startup.
It was previously installed in this same car without issue and 95 civic for about year until it was upgraded to a V4. I will test it again in the 95 really quick but as of two weeks ago it was running the 95 just fine.
- Mon Apr 17, 2023 7:34 am
- Forum: K-Pro / KManager
- Topic: New K24A Swap No Spark
- Replies: 6
- Views: 5480
Re: New K24A Swap No Spark
Check voltage at the coils. If you're only getting 10v's with the key on switch pins 7 and 20 on the C101 connector and retest.
- Mon Apr 17, 2023 7:21 am
- Forum: K-Pro / KManager
- Topic: P1361 TDC Code, timing at -20 deg on startup.
- Replies: 2
- Views: 1238
P1361 TDC Code, timing at -20 deg on startup.
Powertrain is a K24A2/06+ Si trans in a 92 civic with a Kpro v2 installed. When the car starts it commands -20 degrees of ignition timing so the engine barely runs. It also is throwing P1361. I checked all of the wiring to the ECU and it tests good. Is the -20 degree timing at idle a sort of limp ...