Hondata

Can R18 be install hondata traction control?

I would like to know about doing shift full throttle.
Flashpro can shift full throttle with civic r18?
Please advise for shift full throttle setup for civic R18 using flashpro.

thank

CIVIC R18 80mm. Throttle body (Test Run)
https://youtu.be/iq3ItgQ5deE

I tried installing DBW Throttle body 80mm.
For my R18 I installed and adjusted by HONDA HDS.
And use HONDATA Flashpro. It works fine the DTC could not be found.
It can be done. If anyone is thinking of doing it
I hope it is useful.
YouTube : https://youtu.be/RhT1hcLKO4c

Please tell me how to do it.
I have a CIVIC R18 meeting, I just want to do it for only 1 day.
Please
thank you

I use civic r18 and flashpro manager
When I release the accelerator pedal.
A flame comes out of the exhaust.
How to do it using hondata flashpro manager.
Thank you

HONDATA
FlashPro Manager With my R18

Civic FD1
Engine : R18 NA
Gear : Automatic transmission
Throttle Body : J35 DBW
Cam Shaft : skunk2
Injector : Bosch EV14 630cc.
Fuel pump : DW65c
Air Intake : K6 PERFORMANCE 3"
Header : MEGAN RACING+Custom 2.5"
Fuel : E85

Nothing, I just want to say it is ...

Why do you have such a large throttle body, intake and injectors?


Because I made R18 up to 2000cc by the Rod and crankshaft. New Piston oversize new piston Cr.
And I use Skunk2 camshaft, Porting, Oversize port and valve.
I think my device now has to use anything more than the oem. I want to ...

Spunkster wrote: Fri Sep 27, 2019 1:14 pm Is this naturally aspirated or forced induction?

Naturally aspirated
E85 fuel.

Please advise me
Thankyou

I use R18 Engine
I changed the injector to 630cc Bosch EV14.
J35 Throttle body 67mm (R18 is 58mm.)
New 3 " pipe Intake Mass sensor (K&N is 2.5" pipe Mass sensor)

In calibration fuel window current injector size.
I have tried it as a 630cc. But it cannot start the engine.
I would like some ...

I adjusted the lambda unit values between WOT 12.5 A/F and WOT 8.5 Lambda.
Fuel and Ignition and other values are the same
I tried uploading Both and test drive. results of A/F is different.
Please check datalog and advise me thank you.

Spunkster wrote: Thu Sep 05, 2019 9:46 am You should leave that adjustment alone until after all other tuning is done. In most cases that should never be changed.

I will follow your instruction
thank you

Thank you for your suggestion

Civic R18 Calibrations
Can you explain the adjustment in the window ignition retard gear compensation
if I increase or decrease what will happen to fuel and ignition?

Hello

R18 engine Hondata flashpro manager.
I have changed Air intake system From K&N SRI (pipe2.5"Mass flow) to New Air intake system (pipe3"Mass flow)
What values ​​do I need to adjust? To accommodate this change

thankyou