Hondata

If you use the innovate ethanol gauge then you DO NOT need a pull up resistor. I've done it and it works perfect. What you need to do is tap the FLEX FUEL sensor signal going TO the gauge and wire up to the Analog Input 0 on the s300 and it will work as long as you have the latest (WHITE BOARD) S300 ...

Hi, Recently I set up Flex fuel Sensor on my customers NA B20V civic with ID1000s. Tuned it on 93. Drained the tank and filled up with Pump E85. Actually ethanol content was e75 according to the sensor. My issue is I had to set the Flex Fuel Compensation to 75% vs 35% in my previous tunes. Does ...

Thanks! But is there any particular reason why its logic and not sensor ground? Just trying to understand, thanks!

1.In the the Smanager instructions for adding additional pressure sensors, it says to use logic ground, I wanted to make sure this is correct as I thought logic ground is used to ground shielded cables and sensor ground is used for sensors.

2.Can I use the ground on the s300 Analog section and use ...