Hondata

Outside code 37820-PRB-A05
2068-500342 0J03 inside the same
Hondata serial number 0029
Application K20A turbo in ex-IMSA GTU Dodge, 12 psi boost
Kal file attached.

Serial logging was turned off in this version of the KAL

Thanks
Brian

I have ECU error 0 DTC 1607, what can I do now short of buying a new ECU.

Tried reloading a stock map and clearing code a number of times, but no luck the error appears to be permanent. Tried another ECU no error code.

Is there anyone who repairs these or do I bite the bullet buy a stock ECU and ...

Thanks for the speedy answer, I read that but forgot about it.

I have a K series ECU and don't seem to be able to configure the serial output option in the latest version.
I have the Dataloggingoutput=1 in the ini file but I cannot find the enable data logging option in the misc parameters the choices are normal, disabled and non-Honda.
I know i have had this ...

I have a race car with a turbo K20A2, and would like to log data from an on track session. Using a laptop is a problem due to the harsh environment, would it be possible to get some information on the communication with the ECU so that i could write a piece of software to run in a non-windows ...

The IAT error code was due to having the IAT unplugged, the symptoms are the same when it is plugged ina dn the code cleared.

We have a K20A2 in an exIMSA GTU dodge with a turbo. Just got it running but the idle surges a lot after it warms up. It did this with stock injectors and RC 550cc as well.
I think the calibration we started with is of unknown staring point. is there ay way to compare calibrations to see what is ...

We have a K20A2 turbo installed in an exIMSA GTU Dodge and were wondering if there was anyway to log ECU data short of installing a laptop in the cockpit. Is there some sort of logging device available?
The data has to be polled from the ECU I presume, so some sort of USB compatible computer is ...

We have installed a K20A2 in an ex-IMSA GTU Dodge circa 1991 with a turbo.
In the final hook up phase now and we didn't get the complete wiring harness as the O2 sensor goes through the body harness, this is aggravated by the fact that the O2 sensor has two black wires a green and a white wire, the ...