Hondata

the entire datalog the issue is present. It can be seen most prominently in the idle and low throttle afr. i have the wideband set to that offset to have it calibrated to the dyno wb when it was dyno tuned. it was close but i set it to get the 2 sensors spot on. the stock o2 sensor reads a few ...

had it happen again the other day. this time it was not as bad just rich at idle and light throttle. i have pretty long datalog of me driving around my neighborhood which is where it happened. i got home and turned the car off. before disconnecting the ecu i fired it back up and the issue was fixed ...

I will. i put the other map sensor in today and will have the laptop on the whole time im driving to try and get another solid datalog. before I re upload i will unplug the ecu to reset it.

Thank you for the help with the old troubleshooting process. i didnt try to unplug the ecu when it happened last. it was at like 615am in the dark on my way to wor. i haven't driven the car since. the car died but the ignition was still on you can see the vss as i rolled to a stop then shut off the ...

it happened again the other day on my way to work. next thing you know i look at the wideband and its in the 11s just cruising. i had to lightly feather the gas too keep it running and in the 1 minute it took to plug in the laptop and turn it on to datalog for a second it totally died on me. i re ...

i know. last time i was just trying to get the car restarted and off the road since i was in traffic.

thanks for the reply spunkster.

the car is actually running open loop off my tune. just have a wideband which is logged in the kpro. i will try unplugging the ecu and checking those connections.

any other ideas or similar stories that have been debugged? is it possible the files are getting ...

I am using kpro v4 for my k24a2 swap in my base 03 rsx. the ecu is from the base. car is dyno tuned and has been running great for thousands of miles. about 2 months ago the car gave me an issue. i would start to feel a slight hesitation when giving it gas right after an upshift. a day or so later i ...

Thanks for the reply.

Still learning the software here lol. I noticed the other day that my lambda overlay was reading 13's and 14's but my afr was in the 12's. here is a screenshot. it lasted for a few seconds it wasnt just in the transition between throttle positions. why such a difference? which value do i go by when ...

Thanks for the reply. I didnt know the pnd didnt have access to the vtc lock. base models get no love lol. at least i can use the feature when tuning the k24.

Also didnt know there is no post start fuel comp.

-03 base rsx
- 43887
- kpro 4
- not at the car to get ecu # it was the stock pnd 5spd ecu
- version 4.2.6
- bone stock
-got the kpro a few days ago

i started with the base tuned 89 octane .kal just getting used to the software before i swap in my k24a.

few things ive noticed
1) the box to lock ...