Hondata

All the features work for me except the launch control isn't actually working. I can set it and adjust it but it still revs past where I set it.

Sorry. I have a 2014 fg4 and the cal I'm using is the prl short ram that comes with the software.

make sure you set the disengage speed to 3 mph or ...

everything works! thanks again

Hondata wrote:Thanks for your help. We have made changes and released a new version (2.4.7 beta). Download from the FlashProManager Help menu or from the website.

Changes:
FN2 & FD2 full throttle shift fixed.
2013-2015 Si launch control fixed.

hell yes! thank you sir!

alright here is my cal and ecu part number is: 37820-RX0-A21
2015 CIVIC SI w/o navigation

seems to only work on 8thgen civics.

vtecrasr, there is no 'race' calibration for the 12-15 Si, so you don't need to do anything.

Here's a test procedure to follow:
1. Set launch rpm to 3000 rpm. Set full throttle shift to 4000 rpm and 1% throttle. Upload.
2. Start the engine and idle in neutral with the clutch out. Switch off cruise ...

well Hondata, time to chime in! haha

mine does use map fuel tables

Yes, but its only a race-calibration (MAP-Cal)!

If you use a AFM or hybrid you have under "Fuel Table Type" the "AFM enabled" like this:
afm.PNG

Only then, you have a calibration where the new features, etc. works!

i dont even have that fuel table selection on my ...

R-12914 wrote:

vtecrasr wrote:mine does use map fuel tables

Yes, but its only a race-calibration (MAP-Cal)!

If you use a AFM or hybrid you have under "Fuel Table Type" the "AFM enabled" like this:
afm.PNG

Only then, you have a calibration where the new features, etc. works!

thanks !!

R-12914 wrote:

vtecrasr wrote: im not sure.. here is my cal

Yes, you use a MAP-calibration!
Try a MAF-calibration or a MAF-calibration with MAP-fuel tables like me:
my.PNG

mine does use map fuel tables

its not just you, mine does the same thing. basically nothing has changed with the new beta version except loss of launch control

Do you use a AFM or MAP calibration?
It does only work with a AFM calibration!

1. Disable cruise control main switch
2. Press the Clutch Pedal
3. Make Full Throttle ...

My Car is a Honda Civic TypeR FN2 with a Rotrex supercharger and a hybrid calibration (AFM-Cal with MAP fuel tables!)!

Flashpro Version is the newest 2.4.6.0
and the
Firmware Version is the newest 93.0

#2. Full throttle shift issue:
I have activate the "Full throttle shift" in my ...

So I updated the flashpro manager and reflashed my ecu and now the launch control will not engage. Is there something i'm forgetting or doing wrong. It worked before the reflash and now it doesn't.


probably have a 2012-2015 civic si correct? the "new" update shows this under rev limit menu right ...

1. Adjustable launch control on FB6
This does not work on FB6

2. Full throttle shift:
This does not work on FB6

3. Reflash tachometer progress indicator:
This does not work on FB6

4. Cruise control lambda display:
This does not work on FB6

Flashpro software v2.4.6
product version 2.4.2.0